161 results in 0.0331 seconds.
-
Anthology II Adventure
This began as a upgrade project to a mostly home theater (HT) arrangement we have which is a hodgepodge of Yamaha receiver, 12" Mono Sub. Bose 6 and Bose center bar with Bose 101's as rear and rear center speakers. The Anthology II's will for some time to come be above the grade of the other components...
-
3D Printed Speaker Cabinet, Can we do better?
A coworker of mine found out I like speakers, and partake in the forum 😃. He shared a link with me that got me thinking can we do better with the designs shared on this site with the DIY community? My thought is yes, and this also would be fun to use the 3D printer for something other than printing... -
Docero (again)
I built some Docero towers a while back, and while I was pleased with the result, I don't have room for them any more. After considering my options, I decided to pull the components and build a bookshelf set of Doceros.
The drivers were not going to come out easily, but after a bit of... -
DK - Isiris (V2) - Build
Hi All,
I figured I've made enough progress that I can start to share build pictures. I've made a ton of cosmetic mistakes so far - but I've learned not to go out the way to point them out (lol).
It's been a challenge so far. Some comments for others that may consider this... -
Curved Nat P Build
Hi all, I'm probably jumping the gun sharing this project now, as it's a long-term work-in-progress, but I anticipate finishing this summer and couldn't wait to post.
BLUF: I'm building a pair of curved Nat P's. Actually, more like complex-curved, as the top/back is curved and intersects... -
mach1 4024
would anyone have the designs for a mach1 series (4024) speaker cabinet? as usual google is a bastion of flowing mis-information. what i'm intending on doing is building a close as possible duplication of the 70s series 4024s, the 4024a's and later were to imho were junk..these were comparable to my... -
Proposed Statement II MTMWW Rebuild
Hey guys.
It's been about 4-5 years since I built my Statement II speakers. They've been excellent, though my craftsmanship has developed, and I'd like to rebuild them in a slightly more aesthetically pleasing manner.
I attached a couple of photos of my CAD drawings. I've... -
Build Log: Scrap Pile "Zingers" by Wolf
Jon's 'Obi-Wan' project got me thinking about a few kits I have lying around, including one that is somewhat similar in that it is an 8" two-way. I'm talking of course, of Ben's (Wolf's) Zingers design. I purchased this at least a year or two ago from Meniscus since it was relatively low cost and... -
Mark's Statements to Statement IIs Build Thread
In 2008, I can't believe it has been that long, I took the long and rewarding journey of building a very modified set of Statements.
https://www.htguide.com/forum/showth...s-Build-Thread
After much research and contemplation, I have decided to upgrade... -
Any thoughts on side mounted woofer (CSS SDX10) in floorstander designs?
(Just more pondering with parts on hand)
I currently have a pair of:
1) SB Acoustics SB26ADC Tweeters
2) SB Acoustics SB17MFC35-8 Mid-woofers
3) CSS SDX 10 Woofers
I was contemplating using the trio in a slim (relatively speaking) floor-stander with... -
Statements II - Question on Length of Mid Tunnel and Curved Cabinets
I am currently toying with the idea of upgrading my Statements to the Statement IIs.
If I am going to do that, I am now thinking of building new cabinets.
My preliminary idea shows my cabinet being 1.5 inches deeper than the original design. For a total depth of approximately... -
Started building some towers and a center, Anthology/Finalist
First time build. So far so good. Just have one tower left to sand and paint.
The paint is just polished Krylon from lowes.
Powering everything with a Pioneer SC-27 so it should be about 160 watts to each tower and 180 to the center. I would like to hear them with a separate... -
Modula NeoD CC build for fireplace mantel
I am making progress on the subwoofer and learned a decent amount from that build. Moving on the weakest link in my system really is the center channel. I have an old Martin Logan low end center channel that likes to kill amplifiers..
HTguide member Concilian was kind enough to sell me the drivers... -
Statement 2 curved speaker build thread
I recently completed my Statement 2's and posted the results on here. I wanted to try to create a build thread with the few photos I took while building them for anyone that might be interested. A lot of the ideas for the build came from previous build threads on here. I don't know if I have anything...
-
'Singularity' Build Log
Well I can't just let Steve have all the fun! I built an Amp Camp Amp a while back along with the B1 preamp. Given the gain on the B1 I can get usable volume out of several sets of small TM bookshelf speakers, but I wanted something with a bit more oomph in the bass department. It's kind of hard to...
