TV interferences with rsx 1056

[Vicente]

I'm experiencing a problem with my Loewe Aconda TV (PAL). When I turn on my RSX 1056 (any selection) it causes interferences to my TV reception. They are 30-degree lines that appear intermittently every 10 or 15 seconds.

The problem disappears as soon as I turn off the receiver and I don't have it when watching DVD's, only watching TV channels.

The receiver is placed right over the TV unit.

Any idea of how can I avoid this annoying problem?.

Thanks

[Andrew Pratt]

Is there any way of moving the receiver from above the TV? What sort of antennae are you using for the TV channels?

[aud19]

Rotels have pretty beefy power supply's that will create a magnetic field. Unfortunately that will wreak havoc on CRT displays when placed in close proximity to the CRT guns. So basically you need to seperate them...

Jason

[aarsoe]

Would defenitly move the reciever as the effect on the tv is shurely not the only problem - you are bound to get interference from the tv in the receiver as well.

If for some reason you are not able to move the unit, and I strongly suggest that you do, you may be able to correct the problem by using a thick metal plate as shielding.

[Glen1]

I had the same problem with a 976 processor I had but it wasn't too bad. I bought a Primare integrated h/t receiver and it was unbearable. It affected every tv in the house, even one two brick walls and 15 metres away. I tried everything even plugging tv's and amp into next door's power supply and telly antenna but nothing fixed the problem. I swapped the amp for another one and it improved it by about 80 percent. I guess I'll have to live with that.