To all of the new 1066 owners out there: Make sure that once you have everything setup in the OSD, ie. labels, speaker levels, input sources, etc. go to the default area and save your settings. I found out the hard way Saturday night that if you don't do this and you lose power for some reason you also lose all of your settings :cry: I've never had this problem with any of my receivers so I assumed the 1066 would retain my settings after a power failure.
-
-
Mark,
Thanks for the tip. I haven't done that yet and yes, That would be a real pain in the a*& to start over again.
Greg -
Thats odd,
I didn't do that and ive lost power for several hour but not the setting of my 1066.
Guess I was lucky or something. I will save this config right now
Thanks
Frederick RichardComment
-
I can top that. I did save my settings, lost power one day, and it reset my unit back to factory default settings! It wiped out the memory and I couldn't restore my settings.Originally posted by skullmurdoc
Comment
-
I guess I better write all of my settings down just to be safe.Comment
-
I'm helping out a friend with a 1066. I went to calibrate and set the speaker distances and noticed it only offers 5-15ms (I think) in the delays menu. Can someone explain how this works or equates to actual speaker distance. Is it just 1ft = 1ms or is there something else to it.
Did... -
Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.
1. How do I know what firmware is installed on my processor?
Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...15 April 2003, 14:08 Tuesday -
Hi all
After doing a search and reading alot of threads on this forum, i fear i may have either learnt alot or confused myself more than ever.
I have got a RSP 1066 (you figured that) and had some queries on how to get optimum sound out of it for 2 channel stereo from... -
I need to ask what may be a dumb question about the 1066’s Default Setup. I’ve been adjusting the rear channel settings via the remote to approx. +7dB. I find this (although it may be a bit exaggerated) improves the surround experience when listening to basic cable.
My problem... -
I have a couple of questions for the group out there:
I notice the RSP-1066 seems to have two subwoofer settings - you can adjust the sub setting in the test tone screen and also you can adjust it in the subwoofer setting screen. Are these two screens interactive - if you adjust the sub...
Comment