When the voltage reaches 125 the RLC-1040 "trims" it down to 117 volts.....shouldn't it be trimming it down to 120?
-
Bowers & Wilkins 683 Speakers
Rotel RB-1090 2 Channel Amp
Rotel RC-1082 Stereo Pre Amp
Rotel RCD-1072 CD Player
Pro-Ject Debut Carbon w/ Ortofon 2M Red (sitting on a piece of slate supported by 3 "solid tech feet of silence" isolation feet)
Rotel RLC-1040 Power Conditioner
Shynyata Research SR-Z1 Power Outlet & Venom 3 Power Cords x 4
Tara Labs RSC Vector 1 Speaker Cables & Interconnects
Pioneer PDP-5070HD 50" Plasma
Playstation 3
Shaw HD PVR
Primacoustic Room Treatments -
Depending on which mode you have it in; Narrow, Normal, or Wide; it can be plus or minus 5%, 10%, or 15% of 120VAC at the output. At 117VAC you are doing really good.
Eric -
I have a RLC-1040 and a APC H15 - almost the same units. When we have a power failure / spike all equipment plugged into the Rotel RLC unit will power on when power comes back on (even if equipmewnt was off originally). With the APC unit this does not happen. What gives? The settings are identical. I can't get a clear answer from Rotel on this.Comment
-
I looked at the specs on both the RLC1040/1080 and the pictures shows that the RLC1040 has conditioned in/outlet for either phone line or ethernet line. I'm more interested in the conditioning for the ethernet cable, but the specs state that only the RLC1080 has the ability to condition ethernet cables....23 November 2006, 21:45 Thursday -
Hi again,
My work is throwing out some perfectly good APC UPSs, and wonder if any of you delightful fellows know whether or not they would be able to support my ROTEL 1066/1075 units? (and if they are worth using anyway?)
The specs are as follows: (I live in the UK and... -
One questions asked many times on this forum is how to trim the veneer smoothly around speaker holes when the speakers are flush mounted.
The problem is, because the recesses can be as shallow as 0.100" or so, traditional flush trim bits do not work.
So what are the options?
1.... -
Hopefully a quick question for everybody: I've read here and in other forums that the new RLC-1040 power conditioner/regulator is "based on" the APC H15.
Does anyone know for sure if these two are literally EXACTLY the same on the inside, just that the RLC-1040 has a different... -
A lot of receivers have an LFE Trim setting that ranges from 0 to +10. For DTS your supposed to turn setting to 0 and for DD your supposed to set it at +10. Anyone know if the equivalent on the 1066 is the +/- setting in the subwoofer setup menu. I know Rotel doesn't call it LFE Trim, but does the +/-...
Comment