connecting CD and Tuner to Pre-amp

[titan7]

Can I just plug the power cords from the rcd-1072 and RT-1080 into the two outlets on the back of the RC-1070 and run a 12v trigger line from the rc-1070 to the rb-1080? I am thinking of getting a line conditioner/surge protector to plug the pre-amp and amp into. Any other suggestions for hooking up?

[soundhound]

I don't recall their configuration, but if the outlets on the 1070 are "switched", you won't need the 12 v trigger. They will be supplied power when the 1070 comes on, otherwise yes, the 12 v trigger will do the trick.

[titan7]

Thanks,
The RC-1070 has two switched outlets on the back that will power up to 400watts, the Rt-1080 only uses 10 watts and the Rcd-1072 uses 20watts so this will work perfect.

I will use a 12v trigger for the RB-1080.