Can I just plug the power cords from the rcd-1072 and RT-1080 into the two outlets on the back of the RC-1070 and run a 12v trigger line from the rc-1070 to the rb-1080? I am thinking of getting a line conditioner/surge protector to plug the pre-amp and amp into. Any other suggestions for hooking up?
-
-
I don't recall their configuration, but if the outlets on the 1070 are "switched", you won't need the 12 v trigger. They will be supplied power when the 1070 comes on, otherwise yes, the 12 v trigger will do the trick. -
Thanks,
The RC-1070 has two switched outlets on the back that will power up to 400watts, the Rt-1080 only uses 10 watts and the Rcd-1072 uses 20watts so this will work perfect.
I will use a 12v trigger for the RB-1080.Comment
-
I got my new power amp for my second zone and attempted to use the "zone" trigger to power it on and off.
If I go into the set-up area for zone 2 and define the trigger as "zone" the zone 2 amp powers up (a good thing). When I turn off zone 2 (on the 1068) the zone... -
Man, there sure seems to be some confusion on this topic, reading through history. Anyway, my situtation is unique and I'm looking for any suggestions on a solution. I recently came home with a brand new RSP-1068 to replace my aged Marantz AV600/DP870 combo. Stopped at Radio Shack on the ride home... -
I have a 1075 and an Onkyo receiver. I was using a 12v AC/DC adaptor in the switched outlets of the receiver to activate the 12v trigger in the 1075. For some odd reason the power cable failed (it was just a cheapy). I went and got a couple new universal AC/DC adaptors at Parts Express but when I got... -
I have some cooling fans that I'd like to turn on when I turn on my pre/pro.
Do any of you know of a power strip that can turn power to its outlets on by using a 12v trigger?
Thanks in advance. -
Hello guys,
I've been searching this kind of question regarding on 12v trigger it seems that most of the topics is about RB-1080 and getting some problem like bad fuses, L&R ch not working due to resistor, caps and etc. Just wondering if there's anyone here encounter same problem...
Comment