1066 Resistor Fix

[Rotel Fan]

What are the numbers of the resistors to be cut? Andrew's diagram is gone.

[Andrew Pratt]

This thread has the diagram. I'll look into why the other images aren't showing up but the diagram that is showing is really the one you need.

http://www.htguide.com/forum/showthread.php4?t=885

:later: gents

[Rotel Fan]

That's for the 1055 though.

[Andrew Pratt]

I think its the same board.

[Rotel Fan]

Well I need to be 100% sure as you can understand.

[Andrew Pratt]

In that case I suggest sending it in to Rotel to have them do the fix. Its not that expensive and turn around should be reasonably quick.

[aud19]

Here's the 1066 link

http://www.htguide.com/forum/showthread.php4?t=801&page=1&pp=35&highlight=1066+bass+doubling

It's in the Rotel Links "Sticky"

Good luck, I did mine a while back. It was unnerving opening it up but once I got in there I was relieved to find it quite straight forward and a cinch :T

[Rotel Fan]

I have found that link but the diagram is missing. I just need to know which resistors.

[Rotel Fan]

Anyone know?

[Kevin D]

The resistor numbers are the same reguardless of where they are positioned. I've lost the pages I had detailing the 1066, but it's still RW167 & RW170.

Kevin D.

[Rotel Fan]

The resistor numbers are the same reguardless of where they are positioned. I've lost the pages I had detailing the 1066, but it's still RW167 & RW170.

Kevin D.

Perfect that is what I needed to know and if someone could give me a clue on what board they're located?

[Kevin D]

They are actually right on the multi-input board. Just take the cover off and find the board all the multi-room RCA's attach too. Pretty hard to miss.

Kevin D.