Set to make a purchase of a 1066, Is the BM fix in the 1066 same as 1055? Help!

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tarbaby
    Junior Member
    • Feb 2004
    • 15
    #1

    Set to make a purchase of a 1066, Is the BM fix in the 1066 same as 1055? Help!

    I know this subject has been beaten to death but here it is again.
    I'm planning on getting a demo 1066 tomorrow, I know that the 1066 has been replace by the 1068, but Dolby Prologic IIx doesn't do anything for me since I'm running 5.1. I will be doing the bass management fix for the 1066 and have read the FAQ and look at the pictures Andrew posted. His pictures were the inside of a 1055, is the inside of these two units the same? Also, I'm I snipping 2 different resistors or snipping both side of one resistor to remove it? I've done a search on the subject, but my search skill sucks. I need all the help I can get from all of you that have experience with this, picture of the inside of the 1066 would be great.
    Thanks alot and waiting for your replies...
    Tags: None
      • Bottom
    • Andrew Pratt
      Ultra Senior Member
      • Aug 2000
      • 16478
      #2
      They should be the same if I remember right...though the location could be a bit different. You'll want to cut just one side of each of the two the resistors.

      This link HERE should help you.




        • Bottom

        Comment

        • Tarbaby
          Junior Member
          • Feb 2004
          • 15
          #3
          Thanks Andrew, I'll check out the link
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Andrew Pratt
              RSP-1066 / RSX-1055 etc. Frequently Asked Questions (FAQ)
              by Andrew Pratt
              Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.

              1. How do I know what firmware is installed on my processor?
              Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...
              15 April 2003, 14:08 Tuesday
            • BleakShore
              LFE over x-over freq discarded for 1066, 1065, & 1055?
              by BleakShore
              I'm told that the BM in the 1066, 1065, & 1055 discards the LFE above the crossover frequency. That is, if you set your speakers small, and chose to set the sub crossover freq at, say, 60 Hz, anything above 60 Hz in the LFE channel is simply discarded.

              Now, this doen't sound like...
              23 October 2003, 08:59 Thursday
            • dpmckenzie
              1066 bass management fix - quick question
              by dpmckenzie
              I'm getting ready to do the fix and want to take a try at installing the switch as described in this:

              http://www.datasync.com/~firebird/1066/

              My question is: Is the info correct in the above directioons/web site? No offense to the author (I know Andrew provided some info...
              07 October 2003, 16:53 Tuesday
            • doodleboytoy
              ROTEL 1066/1075 vs. 1055/1070
              by doodleboytoy
              I am strongly considering Rotel for my new HT setup due to the numerous positive reviews I read about it. Currently, my plan is to run Paradigm Studio 60 fronts, Studio CC and Studio ADP surrounds using either a Rotel 1066 + 1075 set-up or a 1055 set-up in a 25’ x 20’ room.

              Questions              ...
              05 June 2003, 23:31 Thursday
            • Gary Stevens
              Q: S/N on 1055 vs 1066 ?
              by Gary Stevens
              Greetings!

              I've been pondering the tradeoff between a 1066 and a 1055 and I am wondering if anyone has any info or experiences with the relative signal to noise ratios.

              I believe that Andrew noted in another thread (on another forum?) that Rotel stated the S/N ratio of...
              26 September 2002, 11:34 Thursday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"