Dry fit of the baffle before sanding and finishing.
Final crossover design with baffle diffraction compensation on mid and tweeter.
Crossover design before baffle diffraction compensation, to show original results
FR accounting for baffle...
21 results in 0.0041 seconds.
-
Dayton 3-way Build Thread (RS225 / RS52FN / RST28F)
Dry fit of the baffle before sanding and finishing.
Final crossover design with baffle diffraction compensation on mid and tweeter.
Crossover design before baffle diffraction compensation, to show original results
FR accounting for baffle... -
Ceramica. A three way loudspeaker.
Hello,
I thought it would be nice to share a DIY build of mine which is in progress as we speak. I will be posting pictures here as I get along.
Looking forward to your comments.
URL: https://imgur.com/a/oVPRa9f
Rgds,
Richard... -
Another Anthologys Build
Hi all, first time/long time.
I've ordered my parts and cut my cabinets and I'm really excited to gradually plug away at this build. I'm definitely not a pro, but I've built a dozen or so designs, so not a newbie either. This is probably the most challenging design I've tackled so far,... -
YASIIBT (Yet Another Statement II Build Thread)
Hello all. I recently discovered this forum in my search for info on the Statement II's. I've been wanting to do a DIY build for a while, and one of the features I knew I wanted was a ribbon tweeter. I love the EMIT tweeter from vintage Infinity's (rocking the RSIIIb's as mains and RSVb's as surrounds),...
-
Double curved Statement II and Statement II Centre
With all the buzz around the Statements, I have to get myself a pair! The main complaint around the statements seems to be WAF, so my mission is to tackle that downside. I am planning to solve this, by adding curves to the statement. While this has been done before, I don't know of any build using my... -
Another Statements HT (Monitors, Statements II, Statements II Center)
After many years of browsing many different forums where Curt and Jim frequent, reading almost every "Statements" thread I could get my hands on, and many emails/discussions with Jim and Curt, I've finally taken the plunge into building my HT based around the Statements series. These are truly...
-
New 5.1 setup build - Creativesound V1, V2 and V2 ML-TL
Currently developing a set of 5.1 speakers after being out of the game for quite a while. I am using the creativesound.ca kits. The plan is to use a V2 (MTM) for center, V2 ML TL (vertical MTM, transmission line tower) and V1 (MT, ported 2-way bookshelf).
As of now I haven't started the... -
Mini-Statement Rebuild + New Statment Monitors
It's been a long time coming, but I'm finally going to be rebuilding my Mini-Statements and breaking apart my statement center channel and cannibalizing the parts to make some new monitors (more Qs on that later).
I'll go ahead and answer the questions I see coming: I am re-inheriting my... -
Ochocinco build thread: Building 3 MTM's - Completed -
Did the research, saw how affordable they were, ordered the parts, printed out the cut sheet, and started cutting MDF...so I guess its official.
Total cost for all the drivers and x-over components: $230 (as of 1/20/2014)
The plan is to use these 3 Ochocincos as L/C/R for an... -
An active TMM wave guide speaker
I’ll start this off by saying that I will never build another system without a wave guide. If there are any downsides, I don’t see them.
This system uses 2 RS180 midbass and one XT25tg60 (double magnet) in a wave guide crossed actively at 1700hz. The XT25/60 is superior to the single... -
Curved Statements
I've been a long time lurker and learned a lot, and I've finally decided to get a little more active and show my curved statements build, realistically this will probably take me the next 6-8 months to complete.
Here are my current sealed statements, with 12'' sub base, while I love how... -
Another Statement Monitor build
Expect slow progress here, fellas.
Anyway, I got all the MDF cut at the shop a few days ago,
I got the mid tunnels glued together and am getting the sides assembled now, I'll try to get a pic of them tomorrow. (if I feel like walking in the shop when it is 108*... -
SB Acoustics 3 ways
Hello!
I bought about a year and a half ago some SB Acoustics drivers. I haven't found the time to build the speakers untill now. But I managed to get a 1 week vacation, got my best friend to help me build them (I have 2 left hands) and started to work.
The speakers are:... -
Official Build Thread - MIC
As per previous "New Project Critique" thread, I am starting a new thread to document my build progress over the next few months. Please dont expect things to happen quickly as this is a lengthy, somewhat complex build that I expect with take the best part of 6+ months before it resembles...
-
Unusual approach to 2.1 bedroom system?
My 16-yo son is due for an upgrade from the awful $20 computer speakers in his bedroom. And this is a good excuse for me to build more speakers and dabble in computer audio.
It turns out I have a bunch of RS180 woofers and RS28A tweeters - I considered Modula MTMs, but MTs fit better...