^I wouldn't count on that because limited angle set causes error to power & DI calculation. Nice vertical off-axis responses are partly result of graphical interpolation. Either full 0-90 or 0-180 deg sector with 10 deg step is at least recommended (though it looks that current VCAD version does not overweight the angle closest to 90 deg).
Probably already wrote, but I wouldn't optimize anything before actual full data. One good reason against tweeter tracing & simulation is that traced data measured in IEC baffle at 316 mm is not compatible with far field measurement in actual box.
Probably already wrote, but I wouldn't optimize anything before actual full data. One good reason against tweeter tracing & simulation is that traced data measured in IEC baffle at 316 mm is not compatible with far field measurement in actual box.
Comment