Well the bug hit again ....... time for another speaker build. Since I had done a couple of 2-way builds already I wanted to try a 3-way design this time. After much looking around I decided to go with Troels Gravesen's Jensen 1071 . I was following some new designs here with interest that were not yet finalized (Mr. Marsh) but due his work commitments, very inconsiderate of them to not give him time off!, and my impatience, I went with the 1071.
In the past I've typically finished a project before posting pictures, but decided to go ahead and post as I go this time. I've tweaked the look over what Troels did with his build. I have kept baffle dimensions, driver placement, and cabinet volumes all the same. I found Sketchup rather helpful when it came to keeping track of volumes and in particular all of the needed angles when it came to cutting material.
So I started collecting parts, working on the cabinet design with Sketchup and picked up some wood and started making some saw dust this past summer and here is some of what I've been up to .....
The cabinet design ......
Another .....
The important parts .....
Out of the box ....
To be continued ....... Steve
In the past I've typically finished a project before posting pictures, but decided to go ahead and post as I go this time. I've tweaked the look over what Troels did with his build. I have kept baffle dimensions, driver placement, and cabinet volumes all the same. I found Sketchup rather helpful when it came to keeping track of volumes and in particular all of the needed angles when it came to cutting material.
So I started collecting parts, working on the cabinet design with Sketchup and picked up some wood and started making some saw dust this past summer and here is some of what I've been up to .....
The cabinet design ......
Another .....
The important parts .....
Out of the box ....
To be continued ....... Steve
Comment