It's going to be a 2 way design that's a little over .5 cu ft. He's requested a translam cabinet based on a build I did a number of years ago.
...
334 results in 0.0043 seconds.
-
Heading for Texas
I've started a build for a customer that is not a member of the forum, but I figured I'd share some pictures for the entertainment value.
It's going to be a 2 way design that's a little over .5 cu ft. He's requested a translam cabinet based on a build I did a number of years ago.
... -
Transition to wall-mount speakers, new build or repurpose existing
I'm hoping to transition to wall-mounted speakers in our small home theater room. We have a projection setup and the floor space and protrusion into the space from the speaker is something I want to limit for aesthetics and room function.
Currently my build is based on the Creativesound... -
Any interest in new Class AB power amp design/build with MOSFET outputs?
Teaser alert!
I have extended the VHex+ power amp design of Valery Zaichenko into the VHex_step-up design, 50-70W into 8 ohms.
Step-up features lower distortion, current limiting, output muting, etc., while still having a relatively low parts count.
Have prototype PCB boards... -
Davids 2025 Ohio Speaker Design Competition entry build, the "Marasheenos"
Hello,
Another overlong post with too many pictures about my build for the 2025 Ohio Speaker Design Competition.
This years entry is in the <$300.00, <2000 cubic inch OD category using the Omnes Audio CX3.3 4" coax ($100.91pr) and Dayton Audio RSS210HF-4 8"... -
New Build Thread - Ardent D by SMJ
Well, now that Steve's pile of oddly-shaped wood is looking much closer to a few really nice subwoofer enclosures (congrats Sven), it's likely time to begin to turn his attention to some Ardent D cabinets
.
Plan for this build is based on what Jon is listening to in the living room right...Last edited by theSven; 29 May 2025, 02:33 Thursday. Reason: Added link to thread for the Ardent D - Kurosawa Jr thread -
Illuminate 7 3D Printed Speaker Build
Illuminate 7 3D Printed Speaker Build
By Eric Hampshire
All the photos
Holden got a 3D printer for Christmas and you could say I've kind of gotten into it. I have plans to build some tower speakers from wood but stumbled on these 3D printed versions, which had... -
My Translam project, 18 years later
My first Translam project which the original thread can be found in the Forum, and now 18 years later, and it stilts a smile on my face till this day and makes me wonder how I spent 9 months to build them almost daily after hospital shifts when I was in residency.
they sound as amazing... -
Breaking with modern conventions - a highly musical 2-way system using an 8" woofer
By Jon Hancock
This article will describe the fruits of my efforts to build a moderate sized speaker which might be moderately above average in performance for a basic two-way system. I desired a speaker like this both for my own use in secondary systems, and to fill a need for some friends, who desired fairly full range response (i.e., “it’s gotta have good bass”). Also, though I have access to a good wood shop, many potential DIY enthusiasts may not, so I hoped to use a modified... -
Build Thread - SMJ Equilateral Subwoofer
The journey continues for the theater with a new project to replace the subwoofers that were in use now that the new SMJ CC has been successfully launched. The sono tube subwoofer setup was my very first DIY project that I had done, and it had a grand 10 year run. Wanting a better center channel for...
-
Speakers for a child!
Good morning! I'm starting to plan out a set of speakers for my goddaughter (and her older sister) as they get older. Average age of the two of them is like....4 years old right now. Probably won't start on these for a bit yet, but I want to start collecting parts and watching for sales and stuff. Stuff...
-
Custom bass trap build
Bass Trap Build - https://www.yourmom.sh/basstraps.html
By Eric Hampshire
All the photos
2 weekends have been spent working on bass traps for my 2-channel listening room. I decided to try building them myself to a) save money and b) 3 of the 4 corners of... -
Guitar cabinet build inspired by two rock
Next up is a custom guitar cabinet for my brother in law. I showed him the bamboo plywood and we agreed it would make a handsome cab. The design is inspired by the two rock 2x12 cab but will be setup to stand vertical or horizontal. Threaded inserts will be used throughout and a retro speaker cloth... -
Build Thread: SMJ-40 PE MOD X
-
SMJ ET CCTT Build
It's been long awaited on my part as well as waiting my turn in the queue to have Steve Manning help me with another speaker project for the theater. It wouldn't be fare to not mention Evil Twin either for making me practice my patience while he did the speaker and crossover work for this design. The... -
Anthology II Adventure
This began as a upgrade project to a mostly home theater (HT) arrangement we have which is a hodgepodge of Yamaha receiver, 12" Mono Sub. Bose 6 and Bose center bar with Bose 101's as rear and rear center speakers. The Anthology II's will for some time to come be above the grade of the other components...
