I'm getting ready to start building two sets of Ochocinco's.
I'm going to be building my Ocho's different than the original design. Because of that, I thought that I would try and do something that I've never really done in the past, document what I'm doing, and try and be diligent about it. Hopefully this information is valuable to someone in the future. If someone else likes the looks of the way that I build these, then they shouldn't have to figure out a lot of stuff.
With all of that being said, here's the "look" that I'm going after:
Here's a shot of the dimensions:
And here is an image of what they are SUPPOSED to look like when they are done:
One of my "requirements" for this build is that I MUST have grills, and I MUST have grills that are NOT easily removable, but obviously still removable.
So, there will be two front baffle essentially, one that's about the same size as the original design, and the one that holds the drivers, and then the one that is the front of the actual box, that will be slightly wider, making the other baffle stick out by a material thickness. Then, I'll carry the front baffle to the top, which does nothing for design, other than looks.
On edit: If you don't want to wade this whole thing to see what the final product looks like, here's a shot of them side by side:
I'm going to be building my Ocho's different than the original design. Because of that, I thought that I would try and do something that I've never really done in the past, document what I'm doing, and try and be diligent about it. Hopefully this information is valuable to someone in the future. If someone else likes the looks of the way that I build these, then they shouldn't have to figure out a lot of stuff.
With all of that being said, here's the "look" that I'm going after:
Here's a shot of the dimensions:
And here is an image of what they are SUPPOSED to look like when they are done:
One of my "requirements" for this build is that I MUST have grills, and I MUST have grills that are NOT easily removable, but obviously still removable.
So, there will be two front baffle essentially, one that's about the same size as the original design, and the one that holds the drivers, and then the one that is the front of the actual box, that will be slightly wider, making the other baffle stick out by a material thickness. Then, I'll carry the front baffle to the top, which does nothing for design, other than looks.
On edit: If you don't want to wade this whole thing to see what the final product looks like, here's a shot of them side by side:
Comment