RA-01 Blown Fuse

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ryewoods
    Junior Member
    • Jul 2004
    • 3
    #1

    RA-01 Blown Fuse

    I blew a fuse in my Rotel RA-01 the other day. Being that I got the amp as a graduation present and of course the person who gave it to me no longer has the receipt, I decided to try and fix it myself. Today I opened it up and found the bad fuse. On it, it reads "T4L 250V." Does that mean I'm looking for a 4 amp, 250V replacement? Also, I'm assuming it's a fast blow fuse? Thanks in advance for any help!

    Ryan Woods
    Tags: None
      • Bottom
    • GosonFletchy
      Senior Member
      • May 2004
      • 183
      #2
      T4L 250V is a 4amp 250V slow blow (T stands for time delay).

      G.
        • Bottom

        Comment

        • ryewoods
          Junior Member
          • Jul 2004
          • 3
          #3
          Thank-you so much for your quick response! Good thing I didn't go out and buy a fast blow.

          Ryan Woods
            • Bottom

            Comment

            • Kevin D
              Ultra Senior Member
              • Oct 2002
              • 4601
              #4
              Just keep in mind it may not just be the fuse.. Be ready to pull the plug if other things start smoking (though it should blow the fuse again.)

              Kevin D.
                • Bottom

                Comment

                • ryewoods
                  Junior Member
                  • Jul 2004
                  • 3
                  #5
                  Originally posted by Kevin D
                  Just keep in mind it may not just be the fuse.. Be ready to pull the plug if other things start smoking (though it should blow the fuse again.)

                  Kevin D.
                  LOL...I'll keep that in mind.

                  BTW: I should have mentioned this before, but it's only the right channel that stopped working. I was A/B'ing two sets of speakers I was building to see which crossover I preferred, and boom...the right channel just went out.
                    • Bottom

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • sam500
                      Rotel RA-02: Blown fuse
                      by sam500
                      I stupidly blew a fuse in my RA-02 amp. I've taken off the cover, located the fuse in question and just wanted to make sure that the new fuse I have bought has the right spec.

                      The RA-02 takes a T4A 250v fuse. I've just picked up a '4A 250v' fuse. How important is the T ?! Will the 4A...
                      21 January 2007, 04:05 Sunday
                    • mickyboy
                      anyone using ra01 with rotel 891 or 985mk1 please
                      by mickyboy
                      hi all i have at the moment denon 3802 rotel 981 and 985mk1 powers cdm1nts as fronts, lcr60 center,600s3 as surrounds, av is ok with 3802 but is lacking in sterio performance, having spent too much money on hi fi recently i cannot afford to buy say rsp1066, is anyone using the likes of rotel ra01...
                      01 June 2003, 10:48 Sunday
                    • peterS
                      need confermation on fuse size in 1080
                      by peterS
                      shorted my speakers for a split second testing a suspected defective driver

                      now the fuse only says 250v
                      it fails to specify amperage
                      i grabbed "slow blowing 5 amp" variety

                      they did not have the fast blowing

                      did i atleast grab the proper...
                      18 March 2007, 17:15 Sunday
                    • chachi
                      RSP-1068 fuse blew and replaced - no front channels now (updated)
                      by chachi
                      Power cord unfortunately wiggled loose and fuse on top of power board nearest the rear on/off switch tapped out this week.

                      Don't have a magnifying glass to hand (wheres a box of cracker jack when you need one ?!? :lol: ) so can anyone confirm the requisite rating/values I need to hunt...
                      13 December 2009, 16:27 Sunday
                    • BlackbirdM3
                      RSX 1067 transformer died
                      by BlackbirdM3
                      I replaced the main temp switch for that fans on my 1067 and after testing it with a heat gun (fans kicked on, then kicked off as they should after I turned the heat gun off.) the sensor slipped out of my fingers and touched something popping the 2a 250V fuse. Now the moment the main power switch is...
                      26 November 2018, 16:28 Monday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"