Need to add a balance control....

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • arrakis
    Junior Member
    • Jun 2004
    • 1
    #1

    Need to add a balance control....

    Hello all..

    Just baught a Rc-1090 pre amp... and I must say, it's awesome..

    but...

    I need a balace control... and the pre does not have one... A long time ago I used to have a rc-995 which did have a balance control..

    Anyway, do any of you know of a high end line level balance control (RCA level between source and preamp), that I could purchase that won't degrade the rotel sound..??


    Aslo, is the Rc-1090 much different in sound than the Rc-995? I just ask because, if it is easier to return my rc-1090 and buy a used rc-995 I might do that if the sound between the 2 units is mostly the same..


    Thanx..

    -chris
    Tags: None
      • Bottom
    Previous template Next

    Related Topics

    Collapse
    • luszer
      RC1070 or RC995 matched w/ RB991
      by luszer
      Interested if anyone has an RB1080 or 991 teamed up with either RC1070 or older pre-amp such as RC995. In doing research, a used RC955 costs about same as a new RC1070. Wait are the differences and sonic characters on either pre-amp? Any info greatly appreciated. Tyring to make a hard decision on investing...
      01 July 2003, 10:16 Tuesday
    • HuskerInTX
      PreAmp Channel Balance Issue
      by HuskerInTX
      I checked archives and found no items regarding my item. My issue has to do my preamp, RTC-950AX. After replacing the speaker cables, I had a noticeable volume imbalance. I tested using all sources, swapped speaker, amp to preamp cables and narrowed issue to the preamp.

      I turned the...
      20 September 2009, 09:32 Sunday
    • Victor
      A fully Digital Volume Control for the DCX2496 users
      by Victor
      I while ago there were many discussions regarding the implementation of the volume control for the DCX2496. I use the combination of the DEQ2496 and the DCX2496 to realize most the EQ needs of my full range 3-way dipole system. Until now I have been using two motorized 4-gang pots from Alps. The pots,...
      31 July 2005, 11:46 Sunday
    • vifferboy
      RC1090 volume dial blue LED not working
      by vifferboy
      Hello

      I just picked up a RC1090 from Audiogon, the unit is in excellent condition and sounds very nice. I had an RC1070 before which always seemed a bit bright to me, the RC1090 is very smooth.

      Anyway the one small downer on the deal is that the seller failed to mention...
      03 December 2009, 07:26 Thursday
    • Fre.Mo
      balanced input for RC1090
      by Fre.Mo
      Hello,

      I am in FRANCE. I bought a RC1090 pre amp and I would used balanced input on XLR connections.
      Please can you tell me if this amp uses :
      - the USA xlr system (1: GND, 2: COLD, 3: HOT)
      - or the European system (1: GND, 2: HOT, 3: COLD).

      My Cd...
      13 July 2005, 08:38 Wednesday
    • Loading...
    • No more items.
    Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"