RC1070 or RC995 matched w/ RB991

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • luszer
    Senior Member
    • Feb 2003
    • 120

    #1

    RC1070 or RC995 matched w/ RB991

    Interested if anyone has an RB1080 or 991 teamed up with either RC1070 or older pre-amp such as RC995. In doing research, a used RC955 costs about same as a new RC1070. Wait are the differences and sonic characters on either pre-amp? Any info greatly appreciated. Tyring to make a hard decision on investing soley 2 channel or keep the HT configuration up and running and still utilize 2 channel listening

    Thanks
  • Danbry39
    Super Senior Member
    • Sep 2002
    • 1584

    #2
    Take two: I had a different response written, but I had misread your post.

    I don't have an answer to your question, other than to suggest you not necessarily restrict your search for a preamp to Rotel.

    In fact, I would post over at the Audio section of HTGuide to check out how much used Rogues or Musical Fidelity preamps might go for.

    This isn't meant as a put down on Rotel's product at all, but only to say that that isn't the only possible route available to you.




    Keith
    Keith

    Comment

    • SIH
      Junior Member
      • Jan 2003
      • 8

      #3
      I'm currently using the 991 amp and 1070 preamp and like the combo. The RC-995 has balanced XLR outputs and balance control knob whereas the RC-1070 does not. The 1070 has a defeatable contour switch (I rarely use but has come in handy before). Aesthetically the 1070 is a better match if that's important to you at all. Sonically I couldn't really justify the difference in price when choosing between the two. In direct comparison the 1070 had a slightly blacker, quieter background. They are both pretty simple and straightfoward preamps and either way you should be happy.

      Comment

      • wombat2009
        Junior Member
        • Feb 2009
        • 4

        #4
        The RC-995 is a discrete Pre amp, it uses transistors in the main signal path. The power supply is big enough for a small power amp and it has 2 diode bridges which I suspect means it has individual supplies for each channel. If your into vinyl it has mm and mc switch. So top design and components. The RC-1070 uses op amps in it's signal path, a good power supply and top components. The RC-995 is the better design and should sound better but the RC-1070 is newer and easyer to tweek. Both would be good especially with a matching rotel amp. I have the RC-995 with RB-1070 amp and they sound great to me.

        Comment

        Related Topics

        Collapse

        • bleeding ears
          RB 1070 V's RB 991 Which one best?
          by bleeding ears
          Hi guys ! with the oppourtunity to buy either the RB 1070 or the RB 991 for approx $600-$700 Aus (used), I was wondering which one would be best.

          The RB 1070 is the current model at 2 x 130 watt.
          The RB 991 is about 3 years old and is 2 x 200 watt.

          Hopefully you...
          14 October 2005, 05:12 Friday
        • niggy
          804N with Rotel RB1070 & RB991?
          by niggy
          Hi,

          I have, lying around, a rotel RB-1070 and an older RB-991 amp.

          I have the opportunity to get a used pair of 804Ns at a good price. Was thinking of using these to bi-amp the B&Ws with the 991 taking care of the lower frequencies and the 1070 handling the upper end....
          07 February 2008, 09:37 Thursday
        • gizmo
          RB991+ rsp 1066/68 big difference vs marantz pre?
          by gizmo
          RB991+ rsp 1066/68 big difference vs marantz pre?

          --------------------------------------------------------------------------------

          I see this post
          http://htguide.com/forum/showthread.php4?t=11390
          wywong ask about upgrade Denon 3803 as a pre/processor and...
          15 October 2007, 06:59 Monday
        • ALS
          Klipsch RF3 & Rotel RB991
          by ALS
          Dear Freinds,

          What's your opinion on Klipsch RF3 & Rotel RB991 power + RC1070 pre. Source as NAD 541i. I found the sound from above combo is bright & loud & not very balanced. My feeling is RB991 may be too much power (200rms/ch) for RF3s, since it's a high efficiency speaker...
          18 February 2005, 01:51 Friday
        • JimP
          RB 991 hum question
          by JimP
          I've had this RB 991 for several years as part of a 7.1 home theater system and have had a hum issue that may or may not be a problem.

          Using XLRs to the prepro, if I disconnect the right xlr from the RB 991 amplifier, I get a loud hum. Connect it back and hum goes away. Disconnect the...
          21 May 2011, 09:30 Saturday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"