rsp 1098 question
hi all! new here , and have some q bout my rsp 1098...( sorry for my poor English).... my rsp is connected via toslink to the cable receiver,when i'm trying to go over the surround mode i am getting sounds from all the modes except music 1-4 , 5.1 stereo ,7.1 stereo- only these modes don't work, one more thing - when i'm trying to go from the mode "dts:neo 6 " left to "7.1 stereo , 5.1 stereo, music 4,music 3" ect. i'm getting a high pitch whine sound from all speakers, that happen only when i'm going left in the remote or faceplate, not when going right thou, my rsp ver. is 2.2.6 (090407), can i do a re-install of my own software and hope it will fix the problem?
-
-
have you selected the correct digital input for the source selected ?
you can also try to upgrade the firmware to the latest. Instructions can be found in this board.Marantz AV8802, Marantz UD8002, Rotel RB-991 and RB985mkii, Rotel RD960
Focal/Jmlab Electra 1028S, Electra CC, Electra SW1000S, Cobalt 705
Pioneer KRL-37V, Epson EH-TW8100, Kinkping CES-180 77"inch -
thank's for the replay.....the current firmware installed is 2.2.6 witch i think is the latest, can i do a re - install of the same version?Comment
-
Could possibly be that the required EEPROM update was not applied with the 2.xx firmware update.
Kevin D.Comment
-
Hello,
I'm blind and would like to know if I could use the OSD menu of the Rotel RSP-1068/1098.
I hope you guys can give answers on the following questions:
1. When entering the mainmenu, is the cursor always on the first row? Or will it be on the menu item it was when you left... -
Rsp-1570: Analog Stereo with Bass Management
Does anyone know if we the 1570 can send lower freq to subs from analog without converting the signal to digital?
I am currently using BYPASS MODE, but would like to use my expensive subwoofer if this is possible.
... -
Hi,
I just want to buy a processor RSP 1068 and I wish to known witch is the diference between 1068-1098.I notice some guys on videogon/audiogon sell 1098 around $2000,so is $ 200 more then1068 brand new,or $ 600 for used.I have an Rotel RMB 1075 and Denon avr 3803 right now and I used Denon... -
Hi all
After doing a search and reading alot of threads on this forum, i fear i may have either learnt alot or confused myself more than ever.
I have got a RSP 1066 (you figured that) and had some queries on how to get optimum sound out of it for 2 channel stereo from... -
At present I have a RSP 1066 and the RB 985 power amp, previously I have owned the RSP 980 and the RSP 976. The 1066 is a nice smooth sounding Pr-Amp but compared with my other pre-amps I find it overly smooth. I would like a bit more bite in the treble region, with DVD's it's fine as it tames down...
Comment