rsp 1098 question

[mcamit]

hi all! new here , and have some q bout my rsp 1098...( sorry for my poor English).... my rsp is connected via toslink to the cable receiver,when i'm trying to go over the surround mode i am getting sounds from all the modes except music 1-4 , 5.1 stereo ,7.1 stereo- only these modes don't work, one more thing - when i'm trying to go from the mode "dts:neo 6 " left to "7.1 stereo , 5.1 stereo, music 4,music 3" ect. i'm getting a high pitch whine sound from all speakers, that happen only when i'm going left in the remote or faceplate, not when going right thou, my rsp ver. is 2.2.6 (090407), can i do a re-install of my own software and hope it will fix the problem?

[eelco74]

have you selected the correct digital input for the source selected ?

you can also try to upgrade the firmware to the latest. Instructions can be found in this board.

[mcamit]

thank's for the replay.....the current firmware installed is 2.2.6 witch i think is the latest, can i do a re - install of the same version?

[Kevin D]

Could possibly be that the required EEPROM update was not applied with the 2.xx firmware update.

Kevin D.