Am I driving the amp harder when I have to turn up the volume to meet a certain level?When I use my cdp on my pre-amp the volume is set at 75.When I listen to XM I have to turn the volume to around 85 to reach the same volume level as the cdp.Thanks.
-
-
Nope. If the volume to your ears is the same, the amp is working just as hard in each case. It's just that the XM line level is slightly lower than the CDP's so the pre has to do a little more to get the input to the amp to the same level.
In an extreme case, if you crank the volume on you pre all the way and leave your CDP stopped/paused, the amp will only be drawing idle power. It's what's coming out of the amp that matters. -
Opus007, you will find the same thing with different recordings on your cdp. I have some old recordings that really need the volume cranked up. For example, a lot of modern recordings have been compressed to make them louder, removing the dynamic range that "quiet" recordings provide.
Nigel.Comment
-
i have the same issue when someone comes over and wants to listen to thoses dreaded things called iPods on my system. you have to crank it.Bowers & Wilkins 683 Speakers
Rotel RB-1090 2 Channel Amp
Rotel RC-1082 Stereo Pre Amp
Rotel RCD-1072 CD Player
Pro-Ject Debut Carbon w/ Ortofon 2M Red (sitting on a piece of slate supported by 3 "solid tech feet of silence" isolation feet)
Rotel RLC-1040 Power Conditioner
Shynyata Research SR-Z1 Power Outlet & Venom 3 Power Cords x 4
Tara Labs RSC Vector 1 Speaker Cables & Interconnects
Pioneer PDP-5070HD 50" Plasma
Playstation 3
Shaw HD PVR
Primacoustic Room TreatmentsComment
-
Hello people!
I wonder if any of you guys whom have had expirience with CAP-2100 amp could give me some opinions about the volume on this amp? I have the volume set as relative and in order to get a decent spl I have to set the volume at -34dB to -28dB! With my previous amp I would... -
Greetings. This is my first post with HTGuide.
I have a McIntosh MA6900 integrated amplifier. I have it connected to a pair of B&W 703 speakers. I'm using the 8 ohm taps on the amp. The amp also provides 2 and 4 ohm taps and uses something called "Autoformers" to deal... -
I purchased a Behringer EP1500 amp a couple months ago to run my 15" Avalanche sub but I haven't actually played it since my sub wasn't done yet. I had planned on changing out the fan with a quieter one but it turns out it had a different connector than the one I had bought. Refer to this thre... -
UPDATE: Since we are doing a new Q&A, I thought I would bump this up in case anyone missed it the first time. A good way to see what has already been asked.
Hello everyone,
As you know, Dave Nauber offered an intimate Q&A with the members of Club Classe.... -
I've been fortunate enough to have had my supplier lend me his own Meridian 808 Signature Reference CDP. I've had my eye on this unit for some time and this was the perfect opportunity.
I've just completed a long, enjoyable and concentrated listening session, playing tracks firstly in...
Comment