When i plug in my component video cables to the 1098 I get a buzz across the whole system. No matter what I plug in. (using different components at different times) I tried different cables and different players at still get this buzz. If nothing is plugged in to the component inputs or output there is no buzz at all. do you think the video card is the source. Has anyone else had this problem?
-
-
Hmm, so source or TV you get a buzz. Sounds like there's a ground problem in the component video board.
Do you get a buzz with just cables hooked up (nothing on the other end)?
Kevin D. -
yes if the component video out has nothing plugged in and I plug in different players to component 1,2,3 etc I get a buzz. if I plug in only a component video out I get a buzz.Comment
-
Dear Rotel enthousiasts,
Yesterday I bought a Pioneer plasma screen to complete my Rotel setup
After concluding all the (required) connections I found out that there's a problem displaying (progressive or not) an 1060 image on the Plasma screen.
I really hope... -
hey again guys,
i have a rsp 1098, rdv 1092 and a hr20 DTV reciever. i usually use the hdmi to transfer video from dtv and the dvd directly to the tv. however, i just tried to hook up the component video and nothing wants to work correctly.
i used to have all video going through... -
Greetings again, a friend bought a Epson LCD pj (the new 800 by 600 model), he is looking for the adapter plug that has component video in to allow him to use it for DVD's he seems to think that this plug should be in the neioghborhood of $100 CDN, this sounds outrageously expensive. Is there any product... -
A customer with a B&K Reference 50 is upgrading to a plasma. He is using the component video switching/upconversion feature in his Ref 50, and was wondering if it's possible to assign the same component input to more than one A/V input.
In this case, he wants to have the option of... -
I want to connect a dvd player, Xbox, and cable box to my Pioneer tv using component video . The tv has two component ins. I hooked the cable box directly to component input 1 on the tv, and and the component out of the 1066 to the tv's component input 2. Then I connected the Xbox and dvd player to...
Comment