need help on using rotel rsx-1056

[tdt00]

Hi all,
I just bought a used rotel 1056 and I need help setting up the unit. I'm currently running a coaxial from a dvd player to the unit for sound, the video cable go directly to the tv. What I'm trying to do is to set-up the speaker level and cross-over, but I can't seem to get to it. I have never used rotel products before. I'm reading the manual for the remote rr-1050 and rsx-1056, but no luck. Please help me. Thank you.

[Kevin D]

You will need to connect some type of video cable from the 1056 to your TV. The setup menu is on TV screen only.

Kevin D.

[tdt00]

Hi Kevin,
I connected the video signal of the DVD Player to Composite In-2 and the Coaxial-Output to Digital-Input(Coax-1); no sound would come out if I use Coaxial-Input2 or 3 of the rotel. The Composite Out-2 runs to the TV. And there seems to be no picture if I use Composite In-1; Comp In-2 seem to be the only input that have picture.
I'm starting to question if this unit is messed up.
Thanks for all your time and help, Kevin.

[Kevin D]

You can choose which video input and which digital audio input each input uses. You need to connect the TV to MONITOR OUT in order to see the setup menu..

Kevin D.