Rotel rb 976 MK 2 specs
I've got a rotel rb 976 MK2 that I need specs on. Preferably ampere strenghth and of possible a power cube.
Thank you in advance.
//Asimov66
Thank you in advance.
//Asimov66
-
-
This is for the regular 976:
http://www.rotel.com/content/manuals_archived/rb976.pdf
The Mkii only added a 12 volt trigger or possibly a different face plate. Power specs are the same.
Kevin D. -
wow, thank you very much once again.(however i cant find the ampere number, but you cant get everything).Comment
-
I just wanted to share an odd experience I've been having with my trusty old RSP-976 surround sound processor. For quite some time now (well over a year, maybe more) I've been having one helluva time with the remote control. Specifically, the 976 would only respond intermittently to volume up and down... -
I have the opportunity to purchase a RSP-976 for $500. Or, I could purchase a new 1066 for approximately $1400. Given the situation described below, I'm tempted to get the 976, but only if the two-channel sound is not dramatically inferior to the two-channel sound of the 1066. If I get the 976, I can... -
Putting a system together consisting of a rmp 1066 powering two pairs of
Bohlender-Graebener ribbon speakers and center channel. Looking at a rsp 976 as pre/pro. Has anyone experienced the rsp 976? Are there any issues regarding the rsp 976? Would the rsp 976 be a match? I am also considering... -
Has there been comparisons on the 976 vs RSP 1066. Has anyone traded up to the 1066 from the 976, if so, what were the improvements over the older model. Have there been any issue with the 976 that I should be aware about, also, likes and dislikes.
One additional question: Is anyone using an... -
Hello,
I have been using a bridged rb-976 3x150 for years to power my fronts + centre and a rb-980bx 2x120 to power my surrounds
Now I find that the 980bx has significantly less distortion and better signal-to-noise than my much newer 976
Stereo is still...
Comment