At the moment I have my Toshiba HD A1 connected via the analog inputs on the 1068 for Dolby Digital Plus and True HD. Does anyone know if the Sub 2 can work in addition to the Sub 1 when running in bypass mode with a 1068?
2nd Sub when running Bypass
Collapse
This topic is closed.
X
X
-
Dunno but a Y-connector would.
KalKal Rubinson
_______________________________
"Music in the Round"
Senior Contributing Editor, Stereophile
http://forum.stereophile.com/category/music-round- Bottom
-
The following is from the manual:
"Both SUB outputs provide the same signal. Use either connnection for a single subwoofer. Use both connections to hook up two subwoofers."Brad- Bottom
Comment
-
Back of 1068 ,I believe, should as I have for the In my 1098 for HT have 2 sub Inputs ,so that should work In bypass mode too just like your 1 st Sub.
If you don't have 2 Inputs ,then you can daisy the conecction, and Sub 1 will be the Main command.
Hope that helps!!!
I have 2 subs ASW 850, and connected in 2 different Sub Inputs In 1098, and In Bypass mode It is Sensational!!!
Good Luck and keep us posted!
Cheers- Bottom
Comment
Comment