Video OUT connections on RSP 1066

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • aramb
    Member
    • Apr 2003
    • 36
    #1

    Video OUT connections on RSP 1066

    I have the Rotel 1066 processor and have a question regarding hooking it up.

    According to the manual, the Component Inputs on the processor cannot be assigned, so I have connected Component 1 input to my DVD player and the Component 2 input to my HDTV cable box.

    The manual also states that for recording onto a VCR, there are only three video outputs on the 1066. I have connected one VCR up to Video 3 Input/Output. Now the problem is that I also have an 8mm VCR and am getting a DVD recorder. In order to provide video input into these machines, can I use the Video 1 and 2 OUTPUTs on the 1066 for my additional VCRs even though the Video 1 and 2 INPUTS are being used for DVD and HDTV respectively?

    Thanks.
    Tags: None
      • Bottom
    • Andrew Pratt
      Ultra Senior Member
      • Aug 2000
      • 16478
      #2
      I wouldn't think so but I I only have a VCR to contend with for recording video and it gets a direct feed from the DSS receiver (composite) so i by pass the pre amp all together as far as video outs go.




        • Bottom

        Comment

        • audunth
          Member
          • Sep 2003
          • 35
          #3
          On my RSX972, i use the video 1-3 outputs as extra monitor outputs, and they output the signal from the source selected as rec source independently of what is connected on the video 1-3 inputs, so I would say yes, it should work fine. I would think the same goes for the video 1-3 audio outputs.

          I don't think the RSP1066 is any different from the RSX972 in this matter. I just bought an RSX1055, but I haven't hooked it up yet, so I couldn't tell you for sure yet.

          Just try, I don't think you can fry anything


          -Audun




          Regards,
          Audun
          Regards,
          Audun
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • quadhammer
              Zone 2 and Video on 1066
              by quadhammer
              Hi there,

              I want to be able to watch TV in my bedroom, with a preamp like the 1066 in the lounge. The zone 2 outputs on the 1066/98 seem to be just L & R audio. Is there any zone 2 composite video output that I'm missing?

              Cheers
              16 February 2004, 23:21 Monday
            • JoeHard
              Help with component video and 1066
              by JoeHard
              I want to connect a dvd player, Xbox, and cable box to my Pioneer tv using component video . The tv has two component ins. I hooked the cable box directly to component input 1 on the tv, and and the component out of the 1066 to the tv's component input 2. Then I connected the Xbox and dvd player to...
              23 January 2005, 20:32 Sunday
            • JonMarsh
              ATI Radeon DDR 32 MB Video Card
              by JonMarsh
              Not obviously an audio or video device for home theater, this video card, nonetheless, is rapidly becoming a favorite for HTPC (Home Theater Personal Computers) due to it's remarkable image quality for DVD.

              There are numerous configurations of the Radeon Video card, including a 64MB...
              18 March 2001, 14:32 Sunday
            • nismo
              Fault: Video connections 1066.......
              by nismo
              Hello

              I think I have a problem on my video-inputs.
              In composite (not component) I get a very "blurry" picture. (The OSD is all white, not possible to read)

              In S-video I don't get any picture at all.

              Could it be a fault on my 1066? Have tried...
              13 August 2003, 09:33 Wednesday
            • sindel
              Digital Video Essentials & 1066
              by sindel
              Can use some help on how to work with the Digital Video Essentials DVD and my 1066 processor, I hope this is the right place to post this question. Specifically, while I am probably missing something pretty obvious, I am having trouble sorting out how to work with the audio setup/test tones.
              ...
              06 November 2003, 12:38 Thursday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"