03/18/2005 - 1068/1056/1067/1098 Upgrades from Rotel - Now Available

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hamiltong
    Member
    • Feb 2003
    • 41
    #1

    03/18/2005 - 1068/1056/1067/1098 Upgrades from Rotel - Now Available

    FYI.. Software upgrades now available

    RSP 1098:

    V3.1.1 to V3.1.4 - Fixed an intermittent problem of units locking into “Standby” mode until the rear panel power toggle was engaged. - Improved digital input sensing and format detection. This improvement fixes any problems with no audio when changing channels with some Scientific Atlanta HD digital cable boxes.

    V3.1.4 to V3.1.5 - Corrected an error in V3.1.4 which caused very low center channel output when switching between DD/PLII to PLII modes.

    RSP 1068 / RSX 1056/1067:

    V1.2.0 to V1.2.1 - Fixed an intermittent problem of units locking into “Standby” mode until the rear panel power toggle was engaged. - Improved digital input sensing and format detection. This improvement fixes any problems with no audio when changing channels with some Scientific Atlanta HD digital cable boxes.

    V1.2.1 to V1.2.2 - Corrected an error in V1.2.1 which caused very low center channel output when switching between DD/PLII to PLII modes.
    Tags: None
      • Bottom
    • Andrew Pratt
      Ultra Senior Member
      • Aug 2000
      • 16478
      #2
      Great..guess I've got an update to apply
        • Bottom

        Comment

        • PewterTA
          Super Senior Member
          • Nov 2004
          • 2900
          #3
          Wooo hooo upgrade time, except that means I have to disconnect all my cables again... ACK! They should've make a 35/50 foot cable. lol. Might have to make one myself... hee hee.
          Digital Audio makes me Happy.
          -Dan
            • Bottom

            Comment

            • Azeke
              Super Senior Member
              • Mar 2003
              • 2123
              #4
              Applying update this evening.

              Thanks,

              Azeke
                • Bottom

                Comment

                • whmacs
                  Senior Member
                  • Oct 2003
                  • 184
                  #5
                  Hi Guys,
                  Applied the firmware upgrade this morning. RSP-1098 is now showing v2.1.8. Also did a factory reset. I've given everything a quck run through and have experienced no issues. That being said, I wasn't having any issues with v2.1.7 either, but I can't get HD in my area. I'll be interested to hear from anyone who was having the DD5.1 issue with HD broadcasts to see if v2.1.8 fixes the problem. HD broascasts are commencing here next month.

                  cheers,
                  Stephen
                  My Home Theatre
                    • Bottom

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • stewc
                      PLII vs DSP 5-ch on 1055
                      by stewc
                      I watch a lot of SD video through my 1055 (analog cable channels, for example.) Two modes: through Tivo (analog audio to 1055) or Moto5100 STB (digital audio to 1055). In either case, I've been very disappointed with the 5-channel imaging of DD PLII Cinema -- seemed overly concentrated on the front-center...
                      08 October 2003, 19:17 Wednesday
                    • gladelson
                      RDC PLII Question
                      by gladelson
                      I have owned a RDC-7 for several months and there is something that I haven't figured out. My unit came with the PLII and DTS-ES upgrade. In menus 3-5 and 3-6 you can set the Prologic II mode to either "Movie" or "Music" for those surround modes (2 channel). These settings appear...
                      12 April 2002, 09:12 Friday
                    • Nicholas Renter
                      Is Dolby PLII Music supposed to sound awful?
                      by Nicholas Renter
                      I dropped in a CD and immediately noticed that something didn't sound right (and that "awfulness" was coming from the rear speakers). Somehow, my RSP-1066 was in "Dolby PLII Music" mode.

                      I decided to do some investigation. I cut the output of the front left and right...
                      01 October 2002, 15:29 Tuesday
                    • lars
                      1050-E,1067,1080 Muffled Sound, Low Volume
                      by lars
                      Hello All,

                      I haven't been very happy with the sound from my setup, so as a last ditch effort (because I just didn't want to believe the problem is my 1067), I tried connecting a 500 Euro Yamaha receiver and, rather unfortnately, it sounded considerably better than my considerably more...
                      06 May 2007, 09:10 Sunday
                    • rotelnyc2
                      Yet another question about RSX-1067 hiss/pop
                      by rotelnyc2
                      Hey all!

                      I'm a first time Rotel owner, been eyeing the RSX since the introduction of the 1065. First off, I did find a good amount of info on the hiss/pop issue amongst the threads, but didn't find much info on my questions and issues specifically so I decided to start a new thread,...
                      04 March 2005, 07:31 Friday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"