Cable remote

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nxym
    Junior Member
    • Apr 2009
    • 9
    #1

    Cable remote

    Hi

    Does anybody know where i can find the connection cable for remote control of the c2 parasound? Is an Rs232 cable to 3.5mm jack (with 2 or three rings?) My seller send me an USB to 3.5mm jack with three rings) on a box but my laptop does not recognize it at all. Maybe an Rs232 converter is missing? My cable its only a cable and does not seem to do any convertion. Is there any diagram to make a cable?
    I attach a photo from my cable
    Also i download the last software version for C2 v1.1 and i didint find that has the last changes such lipsync and dsp modes ( IIx ) or tone frequencies either. Is that missing or is that me i can not find it?

    Thx
    nick
    Attached Files
    Tags: None
      • Bottom
    • Peter Nielsen
      Super Senior Member
      • Sep 2004
      • 1188
      #2
      You need a 3.5mm stereo plug to 9-pin female D-sub. Note that this is not a standard off-the shelf cable. (I have a few of these special cables. PM me if you need one).

      If your computer does not have an RS-232 port, you will also need an USB to RS232 adapter.

      The cable in your picture will not work unless you snip off the USB connector and replace it with a D-sub connector...

      Peter
        • Bottom

        Comment

        Previous template Next

        Related Topics

        Collapse
        • PewterTA
          Well I guess it's true... a USB cable can make a difference.
          by PewterTA
          This is the third upgrade I've done. My original cable was just a cheap USB cable I got from who knows where and it worked sounded good and no complaints.

          This all going to my Musical Fidelity V-Link 192.

          Then I upgraded my usb cable to a Wireworld Ultraviolet cable and...
          27 August 2013, 21:28 Tuesday
        • chamath
          Rotel Firmware update -- info
          by chamath
          I would like to share my 2nd upgrade experience with you so hopefully you would not run into the same issues I had. I have a Rotel RSX-1057; however, the issue described below would apply to any upgrade as it was not a Rotel problem.

          Firmware: (1057)
          my system = 2.1.2
          ...
          03 December 2007, 15:04 Monday
        • roscoe62
          RSP976 RS232 woes
          by roscoe62
          Hi there!

          I am trying to get my HTPC to send RS232 commands to my Rotel RSP976 but I'm not having much luck!

          I purchased a PCI card that adds 2 comm ports to my PC (com3 & 4) and they show correctly in XP. I constructed the cable as outlined on this fine forum and I'm...
          24 November 2003, 16:39 Monday
        • phuz
          Cisco Cable for RS232?
          by phuz
          I think I'm finally going to update my RSX-1056, and I'm wondering if a regular cisco cable that is used for switches and routers will work? My receiver didn't come with the RS232 cable.
          12 February 2008, 21:08 Tuesday
        • RonLenker
          RC-1570 PC-USB cable/connection
          by RonLenker
          Hello,
          I recently purchased an RC-1570 pre-amp as a replacement for a RC-972 in a stack of 2 channel Rotel gear. Before placing into service, I was persuaded to provide the ability to spin some vinyl at the beach with some college friends, so for the time being it is feeding some KRKs and a REL...
          20 May 2015, 19:33 Wednesday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"