The speakers come with a pair of foam plugs, one smaller than the other. Are they both meant to be used for the port in the rear of the speaker or one is also for the port in the front? Does it matter if the smaller or larger one goes in the front or rear?
B&W 603 foam plugs
Collapse
This topic is closed.
X
X
-
-
Or unless the rear of the speaker is too close to the wall behind... they are supposed to modify low frequency output to allow smoother "in room" response... if you feel they are required to tone down boomy, over thick bass. CPALIU, a good place to start placing those 603's would be (use tape measure if needed) about 800mm - 1m, measured from the baffle (front of speaker) to the rear wall, and more if your space allows, with a slight toe in towards the listening position. The 603's are best suited to a "free space" position, so try to keep them free of corners as well if possible as this will min. wall reflections which will negatively impact the quality of sound you hear.Originally posted by jim777Anyway you probably will not want to use them (unless you also get a sub).- Bottom
Comment
Related Topics
Collapse
-
by See-FuCurrently I have a set of 603 S3's in the front along w/ the larger 600 center. I'm thinking about purchasing a set of rear speakers. Should I leave the 603's in the front and getting something like the 600 or 601 for the rears or would I be better off movin the 603's to the rear and get a set of...-
Channel: Club B & W Speakers
-
-
by StoneyI have read about foam plugs that B&W includes with some speakers to plug into the ports to reduce bass output. I have a pair of DM 605 S2 and I was wondering if I could use plugs to reduce some boomyness in my room. What are the plugs made of? Is the foam similar to the foam used in the swimming...-
Channel: Club B & W Speakers
-
-
by Spanky HamI think a lot of you use ear plugs, so I was curious which ones people are using. I have a lot of experience using the E-A-R Classic foam plugs, as these were standard issue when I was a Marine Corps Armorer. I prefer the foam over the other kinds. I notice E-A-R has a taper fit. I was thinking of giving...-
Channel: Mission Possible DIY
-
-
by eLiasGRi'm listening stereo with my 603's and happy with them. now i want to complete my center and rears with 600 series.
for the center i have 2 choices as you already know.
LCR60 and LCR600
and for the rear i'd like to go with either 600 S3 or 601 S3.
...-
Channel: Club B & W Speakers
-
-
by big GI have new 602 s3's and have the option to trade for 603 s2's even. The 603 s2's have been used as rear speakers on a rotel 5.1/b&w system for 3 years. The 603's are my brothers and he feels he doesn't really utilize them because that are surrounds only. He is simply offering as a favor.
...-
Channel: Club B & W Speakers
-
- Loading...
- No more items.

Comment