I have actually used the XT4s with the Rb 1080 and can say that it is a good combination. I would however have some hesitation about the RMB 1066 for the center and surrounds. The RMB 1066 is intended more to be a distribution amplifier than a system amplifier. You would probably be better off with an RMB 1075 for everything or as a good option, use an RMB 1077 for everything.
B&W XT4
Collapse
This topic is closed.
X
X
-
Ive had a 7.2 XT sytem: 2 XT4; 4 XT2; XTC; 2 PV1 all driven by a 1080 and a 1095 all for 3 years going. The only thing I have swapped was a 1068 for a 1069 and a sony BDP2000es for a 5000es. I yet have to hear a better sytem anywhere since I don't know anyone with a full 800 series system (not even dealers
) The quality and amount of sound is simply staggering. Now that I'm fully HD, I don't see myself upgrading anything for the foreseeable future except in case of component failure. As far as audio or video is concerned I'M DONE :T
BTW for those still on the fence about bluray, the 5000 ES is it. No compromises in any arena, perfect video and sound, that now covers all codecs (internal decoding or bitstream). Plus, it's finally adroit at the old bluray irritants, loads fast, updates directly from the internet, doesn't hang up, etc, etc, finally a BD player that seems like a fully baked product rather than a work in progress. The only reason for waiting now is to have all those goodies at a cheaper price.
One thing to note: All this gear, including the top of the line 50in elite plasma costs about the same as than a pair of 801D's. I call that the deal of the century! :B- Bottom
Comment
-
I now have my XT/4/2/c and pv1 hooked up to the classe 5200 and ssp-800 and think that the sound is awesome. Does anyone think there's much difference in sound quality between XTs and low end 800 series i.e. aluminium dome tweeter series? Where does B&W place the XTs in their line up? Just below the 800s?- Bottom
Comment
-
IMO the main difference is the midrange. The 8 series mid is slightly more forward, the Xt's mid is a little recessed. In general the 8 series mid lows are more coherent. This difference, however, disappears when the XT4 is coupled with the PV1. The XT however being from the ground up an HT speaker has much better dispersion than the non diamond "series". It disappears into the room much better. In general, the most conspicuos difference is that the 8series has a "fuller" sound. The addition of the PV1, however makes up for it. One point that is important, and that not many people make referrence to, is that 2subs is always better than one. Although its hard to locate a sub, if you walk around a room, where the sub lies will be bass heavy while the rest of the room will be bass "lite". Ergo for best music reproduction 2 is much better than one. If the sub is only for movie LFE effects, then, one is OK.Originally posted by ShakespeareI now have my XT/4/2/c and pv1 hooked up to the classe 5200 and ssp-800 and think that the sound is awesome. Does anyone think there's much difference in sound quality between XTs and low end 800 series i.e. aluminium dome tweeter series? Where does B&W place the XTs in their line up? Just below the 800s?- Bottom
Comment
-
-
Think of it as a HT version of the 7 series. Similar performance and components but minimized cabinets (totally different look). In fact they stand on their own, they stradle the HT/audio spectrum, definitely the best of the dedicated, slim HT speakers (by far) and below the 800 series for music. However, you have to compare type to type, an XT4 to an 804, an XT2 to an 805. Comparing an 805 to an XT4 is silly, one is a full range speaker, the other is a monitor.Originally posted by Shakespearew1 Rotel where does the xt series sit in the b&w line?- Bottom
Comment
Related Topics
Collapse
-
by Frankster72Hi there,
lately I got my fixed surround rotel rsp-1069 preamp back. big improvement to sound!
but right now I'm trying to find the best setup for the XT4 speakers in combintion with the PV1 sub. the sub is placed right at one of the front speakers. my amp is a rotel rmb-1077...-
Channel: Club B & W Speakers
-
-
by smjc99I want to setup a sleek home theater and when I heard the sound of Xt4' with a the best Rotel Rcvr, the sound was very good on music and movies. For my ears they were very good
Are Xt4's available in Black?
I heard 802 D's , amazing but then i heard Xt4's I liked...-
Channel: Club B & W Speakers
-
-
by wxmanunrOk, this may be a dumb question. And, it is slightly off topic. But, I want to add a DLNA client to my system that will feed my Classe SSP-800 via HDMI with no sample rate conversion or other messing around with the signal. I'd like to primarily feed CD-sourced FLACs (to get rid of clutter and put...-
Channel: Club Classé
-
-
by muckeDo you guys think the ra 1070 could drive xt4.
Today i have the xt2 whith this amp and it work just great, but i want to upgrade the speaker to the xt4.
I like the sound of ra 1070 and want to keep it.
I have two way to go.
1. keep the xt2 and add a sub...-
Channel: Club Rotel
-
-
by Frankster72Hi,
I have a complete home cinema setup
XT4 Fronts
XT2 Reads
XTC Center
PV1 Sub
which sounds very descent....
and as far as I know utilizes the XT series the same 25mm tweeter then the 8'er series except the ones with the diamond...-
Channel: Club B & W Speakers
-
- Loading...
- No more items.

Comment