Wanted to build the Monitors ,but did'nt want just a rectangular box, so I changed the shape slightly by slanting the back .
Int Vol is identical ,..Width is the same ,..Spacing between drivers is the same,..Tunnel center is the same length,..the only difference is now the box is at 20" height.
I took 1'' off top and 1" off bottom.
Top is 11" deep ,..bottom is 15" deep.
I replaced the round port with a slot port of the excact same Area 1"x 3.14" sq in, and shortened length by 1/2 " for end correction.
Int Vol is identical ,..Width is the same ,..Spacing between drivers is the same,..Tunnel center is the same length,..the only difference is now the box is at 20" height.
I took 1'' off top and 1" off bottom.
Top is 11" deep ,..bottom is 15" deep.
I replaced the round port with a slot port of the excact same Area 1"x 3.14" sq in, and shortened length by 1/2 " for end correction.
Comment