Well, I finally have some pictures, but sadly its of a mistake.
The router was dull, the bit moved off the bearing, and not only did we have to scrap that front baffle [it was already glued down to the box, cut it off with a band saw.] But now we have to remake the template for the flush mount hole.
Fail.
Anyways, it looks really awesome, much better in really life.
I didn't really want shiny speakers at first, but I think this is going to turn out great.
The slots cut out on the left/right side of the piece of aluminium would have been filled with a piece of maple, which is then going to be flush trimmed to the box, and then given the 1/2 round over.
The box will be a shiny black.
So far the biggest out of wack tolerance that we have is the height. Its supposed to be 22" and its actually just under 22 and 1/32". We are long about 1/64th a foot.
The router was dull, the bit moved off the bearing, and not only did we have to scrap that front baffle [it was already glued down to the box, cut it off with a band saw.] But now we have to remake the template for the flush mount hole.
Fail.
Anyways, it looks really awesome, much better in really life.
I didn't really want shiny speakers at first, but I think this is going to turn out great.
The slots cut out on the left/right side of the piece of aluminium would have been filled with a piece of maple, which is then going to be flush trimmed to the box, and then given the 1/2 round over.
The box will be a shiny black.
So far the biggest out of wack tolerance that we have is the height. Its supposed to be 22" and its actually just under 22 and 1/32". We are long about 1/64th a foot.
Comment