A problem with the 1066 video switching?

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MattCXII
    Member
    • Feb 2004
    • 90
    #1

    A problem with the 1066 video switching?

    I just bought a Panasonic PT-AE500 FP. I have ran the component cable through the 1066 and inturn back to my FP. I am noticing green and sometimes red scan lines through the projected image. They are only periodically shown and would appear to be only through the Progressive Scan feed as HD feed seems clean. Has anyone experienced this when running video through your 1066? I have heard concerns that you loose some image quality when doing this.

    Thanks for all your info.

    Matt
    Tags: None
      • Bottom
    • aud19
      Twin Moderator Emeritus
      • Aug 2003
      • 16706
      #2
      Sounds like a bad video board. I'd contact Rotel and/or your dealer to have it repaired under warranty Having said that, yes you should if possible connect your video sources directly to your display.

      Jason
      Jason
        • Bottom

        Comment

        • MattCXII
          Member
          • Feb 2004
          • 90
          #3
          I am going to try that tonight to see if it corrects the problem. I never thought it could be the 1066... automatically thought it was the projector. Hmmm.... Something to think about. Hopefully it is the Rotel gear since that would be easier to send away than the FP. I bought the FP in Ottawa (5 hours away) and the Rotel gear down the street from me.
            • Bottom

            Comment

            • aud19
              Twin Moderator Emeritus
              • Aug 2003
              • 16706
              #4
              Definately do some troubleshooting first but that sounds like the problem...

              Jason
              Jason
                • Bottom

                Comment

                • MattCXII
                  Member
                  • Feb 2004
                  • 90
                  #5
                  Problem solved!

                  It was neither the projector nor my RSP-1066. It ended up being a shit piece of component cable from Monster that I was using as an interconnect between the DVD and the Preamp. My long run of component to the FP seems to work out great... damn that Monster cable!
                    • Bottom

                    Comment

                    • aud19
                      Twin Moderator Emeritus
                      • Aug 2003
                      • 16706
                      #6
                      aaah good old Monster :lol:

                      Jason
                      Jason
                        • Bottom

                        Comment

                        • MattCXII
                          Member
                          • Feb 2004
                          • 90
                          #7
                          That company is more advertising than it is quality. What a waste of 70 bucks that was.

                          Live and learn. ops:
                            • Bottom

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Isaac
                              BEST AUDIO & VIDEO Through HDMI
                              by Isaac
                              How can you get the best audio & video through HDMI? Seems to me that everyone is using just the digital coax or optical for "normal" DD or DTS and not using the new fomats. I don't want to have to turn on my reciever everytime I watch a movie. I don't want to run the HDMI through the...
                              27 December 2008, 02:03 Saturday
                            • mattstacey
                              Rotel 1066 component video setup problem
                              by mattstacey
                              Hi guys,

                              I just replaced my Denon 3802 with a Rotel 1066 yesterday, hooked up to a Rotel 1075 amp. I haven't had much of a chance to listen to it yet but so far it sounds awesome.

                              I have a problem with my video connections though. I had no problems with the Denon 3802 so...
                              18 October 2003, 23:39 Saturday
                            • alphaGeek
                              Hello Club Rotel! / Video Switching Question
                              by alphaGeek
                              Hello,
                              Thanks to reading your forum for the past few days, I pulled the trigger and purchased my 1066 yesterday. Whee!

                              I have a boat-load of questions, but here is my first:

                              Do you recommend that I use the 1066 for video switching?

                              I have:
                              ...
                              16 February 2003, 15:29 Sunday
                            • wanderso
                              Rotel 1066 Video upgrade questions
                              by wanderso
                              I am finally breaking down and doing the video upgrade on my 1066. Does anyone remember what was done for this upgrade? I have the component module from Rotel sitting at the dealers, but they are totally clueless.

                              Is it a simple module swap (the module looks really easy to swap out...
                              13 April 2005, 21:36 Wednesday
                            • subynube
                              Audio/video delay on oppo DVD player?
                              by subynube
                              Just bought an Oppo DVD 981HD player. I hooked video/audio to TV with HDMI cable, and digital coax audio to my pre/pro.(Emotiva LMC-1 by the way). I am noticing a delay between the audio and video picture. It is slight, but was not there with my last Denon DVD player. I can percieve the delay both...
                              27 February 2008, 21:21 Wednesday
                            • Loading...
                            • No more items.
                            Working...
                              Searching...Please wait.
                              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                              Please push the back button and reload the previous window.'
                              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                              Please push the back button and reload the previous window.'
                              An internal error has occurred and the module cannot be displayed.
                              There are no results that meet this criteria.
                              Search Result for "|||"