What are make, model, and spec's of the D/A and A/D converters and the DSP chipset used in Rotel 1065 and 1055 receiver's. I had read that the DAC's are from AKM and are 96kHz/24-bit. Is this correct?
-
-
Yup,I read somewhere it also uses a Cirrus Logic processing chip
-
Both the RSX-1055, RSX-1065 and the RSP-1066 have a Crystal CS49326 DSP from Cirrus Logic.
For D/A conversion the AK4324 chips from AKM are used. These are stereo 24bit/96kHz DAC's with total of 4 being used.
For A/D conversion the AK 5351 Dual bit 20 bit chips from AKM are used.Comment
-
Thank You.Comment
-
I am a new member and could use some help with my new HT decision. I just got a projector and will buy the rest of my system by next week. I am ready to go with Rotel for the preamp, amdp, and probably the DVD/ CD. All in the family you know. I am considering the RSP 1066 with amp, RSX 1065, and RSX... -
Does anyone know, aside from the power difference, if the internals and layout of these two receivers are basically the same, or is the RSX-1065 actually a step up, quality and parts wise? I'm trying to determine the real difference between these two products.
The RSX-1055 is actually... -
All,
I am seriously considering the purchase of a Rotel 1065 receiver, and have been reviewing the posts on this forum. I note that there is a lot of info on the 1066+Amp, and 1055, but relatively little on the 1065. I will be using it with B&W N804, N805, and HTM2.
... -
Hi Guys,
I have posted in the past about Rotel but ended up with a Primare ht amp which I did like but was frustrating to use and frustratingly unreliable so it's been sold and I'm back to Rotel again.
My plan is to have a 2 ch and surround using the same speakers but with a ht amp... -
hi
There may some good news here !
I noticed the micro-code for the Cirrus Logic CS49326 has been updated. (The CS49326 is the main chip inside rsp-1066 and rsx-1055).
According to the Application note rev7 dated march 2003, it now supports DTS 24/96 decoding...
Comment