On Screen Display shows EMPTY
I'm trying to get to the On Screen display on the TV. On the remote, RR-1050, I press AUD, then push Menu/OSD --- Menu pops up and says EMPTY. Nothing shows on the TV screen. Yesterday a "technician" got the Menu to display on the TV screen, but was unable to make any changes using the directional keys. I cannot understand the manual. RSX-1056 Help ? :roll: :roll:
-
-
Hear is my reply to the same question on your "RSX 1056 -unable to change to Dolby" topic:
If you are seeing MENU and then EMPTY on the RR-1050 LCD display, that means there is no code stored for that button press.
When you press the AUD button are you pressing it hard enough to register so that the LCD display says AUD (or whatever custom label might have been user programmed for the AUD input selection button)?
I ask this because on my remote, after some years of wear and tear, it takes a hard press for it to register. If I select TUNER, for example (and the display then says TUNER), when I press the Menu/OSD button, I will get MENU followed by EMPTY, which is normal because there is no preset code for that button when TUNER is selected.
If you are sure that when you press AUD, the LCD shows AUD, and you still get EMPTY for the Menu/OSD button, then you may want to reset the buttons for AUD (and by default also those commands under the V1 input selection) by pressing the recessed Preload button at the bottom of the sliding portion with a ball point pen. You will erase all user programmed and learned commands for the AUD and V1 inputs.
Alternatively, you can use a ball point pen to depress the recessed Clear button, then
1. Press a command button to clear and restore the factory preset for that button
or
2. Press the AUD button for less than one second to clear and restore the factory presets for all buttons under the AUD device.
But I still suspect that when you're pressing the AUD button, it has not registered and changed the remote's focus to AUD (and displaying AUD on the LCD display).
Steve -
Buy a Logitech Harmony One.Comment
-
Here's Dave's answers, formatted by me, but otherwise not altered:
Dave:
I would like to add some general comments to supplement the answers below. First, thank you for taking the time to organize the list for me and post the answers. Club Classé is a great way for current... -
Hi,
on thursday I got my Rotel rsp-1068 and rmb-1095, I hooked everything up, made some quick changes using the osd/menu and enjoyed my new components. Yesterday I placed everything in my audio rack did some further tweaking and listened some more. Today I wanted to play some more with... -
I love home theatre. music etc, but am not very technical, so have had a problem that I can not solve - I am sure it is quite simple, but would appreciate some help from members.
I want to adjust the levels of each of the channels, and looked in the manual how to do it. I tried to put... -
Hi
I have just recieved my rotel RSP1068 from a dealer here in Denmark.
I cant acces the main menu in the processor. :roll:
I press the Menu/osd button on the remote and get the system status screen.
Then I press the enter button (ENT) on... -
I have done a search and read about other peoples problems with no OSD but still can't work out my problem.
I have the AUD mode selected on the remote, and then press the Menu/OSD button on the remote. I see the OSD on the front panel display light up but there is no OSD on my TV....
Comment