serial cable for firmware upgrade
Collapse
This topic is closed.
X
X
-
Tags: None
- Bottom
-
I am under the impression that it is a proprietary wiring scheme and you will either need the Rotel cable or will need to DIY one.
Here is an HTGuide thread that explains it.
Kevin D (Moderator) would probably know if this is correct or maybe even where a Rotel cable could be sourced.
Steve- Bottom
-
The cable part # is CB00004 and it can be ordered by contacting Rotel Technical Support at 978-664-2870.
The pin configuration for this cable is available here (PDF): Rotel RJ45 to DB9 Cable Pin Configuration Diagram
Source: http://bwgroup-support.com/rotelsetup.html- Mike
Main System:
B&W 802D, HTM2D, SCMS
Classé SSP-800, CA-2200, CA-5100- Bottom
Comment
-
Originally posted by mjbThe cable part # is CB00004 and it can be ordered by contacting Rotel Technical Support at 978-664-2870.
The pin configuration for this cable is available here (PDF): Rotel RJ45 to DB9 Cable Pin Configuration Diagram
Source: http://bwgroup-support.com/rotelsetup.html- Bottom
Comment
Comment