Pops RSP 1066

[Axial Offset]

Hi,

I have a "pop" in my speakers when i change langage of the DVD or when i press the mute key on the remote.

Anyone have this problem ?

[Jay Sylvester]

I also experience popping noises when changing sound formats or while navigating menus. It's considered normal for this unit as long as it's not so loud as to risk damaging your speakers.

[Andrew Pratt]

that's strange...I've not heard any poping on mine. What firmware are you running?

[efarstad]

No popping on my 1066 either? :?

E





The Norwegian A/V Nut!
E-Cinema

[Axial Offset]

that's strange...I've not heard any poping on mine. What firmware are you running?

My soft is 2.2.0,

Another test : when i decrease the volume, at the transition 1 to min, i have a pop !

The pops are unequal, some of 1066 pop and some of them don't pop.

The pops are unacceptable.

[Axial Offset]

that's strange...I've not heard any poping on mine. What firmware are you running?

My soft is 2.2.0,

Another test : when i decrease the volume, at the transition 1 to min, i have a pop !

The pops are unequal, some of 1066 pop and some of them don't pop.

The pops are unacceptable.

[Andrew Pratt]

that last one sounds like the muting function is turning on at the bottom end...

[hubco]

ive got a popper!.............is this grounds for trade in?...

[SergeH]

I have a very very very little 'plip' when doing this with my dvd player : 'pause', wait 2s, and press 'play'

Serge.

PS : Axial, do you know www.homecinema-fr.com ?

[hubco]

bigtime pops everytime i change the channel on the tv

[MuShu007]

HMMMM, My 1066 does it too only when you put the R-EQ on. I don't hear nothing on the volume control or changing tv channels......that's odd! :?

MIKE

[Brent]

My Silver 1066 purchased in late June also pops when navigating the menue and changing sound modes It's not loud but it is there. Since some people have poppers and some don't I guess it might be time for those of us who do to get them looked at. BTW how can I tell what version of software I have? There is nothing in the menu or the manual?

[Andrew Pratt]

hold down mute till the firmware value pops up

[Axial Offset]

Mine is 2.2.0

[Axial Offset]

Mine is 2.2.0

[Brent]

Well mine is 1.3.7, I would have thought it would have had a newer version out of the box. :? Oh well.

[swrsme]

Hi,
any new News about the plop Problem? I have it too
My Soft-Version: 1.47

THX
Stefan

[Andrew Pratt]

I'm about to fire off an email to Rotel so I'll include this in there as well...

[swrsme]

THX Andrew

[Curtis Douglas]

Mine has never made a popping sound no matter what I am trying to do. I am at 1.37

[Andrew Pratt]

neither my 1066 nor the 1055 have popped either for soung modes...the closest I've come is turning on and off cinema eq but since I never bother with that function I'm not sure if its constant or happened the time i tried it.

[swrsme]

i tried the cinema eq. ON/OFF out but no change - plop is alive :cry:
I contacted Rotel Germany with this Problem - informations follow.

Stefan

[Michael G]

Could your power amp cause the popping? My 1066 also pops, for example, when a dvd movie starts and the 1066 switches into Dolby Digital mode. I think that my power amp (B&K ST140) causes the pops when it loses the signal for a split-second.

The reason I believe this is because my prior pre/pro, a Sony TAE1000ES, also popped whenever I switched sources or changed surround modes (causing a momentary signal loss to the amp). However, the Sony didn't do that until I got the B&K power amp. I'm still using the B&K with my 1066 and I still get the pops when navigating the menus or switching sources.

[swrsme]

Hello,
pops arise only with digital inputs, with analog inputs goes wonderful - but volume from 1 to min i have still pop´s. I changed my front-amp (NAD 216THX to Rotel RB 985 THX) the pop´s are more quietly but still there.

Stefan