Last night I was intializing the TT (Rega P7), dropped the needle, did not hear anything. Upped the volume and heard a faint sound of music. I then noticed my source was the Tuner and not the AUX1 (using a Graham Slee Era Gold Mark IV as my phono stage). Is this bleed through a common problem with SS equipment at this level (mid-fi) or will all pres exhibit some form of bleed through?
-
Hello everybody
I received my Rotel RC1082 from my dealer couple months ago and everything looks fine.
The problem was that the volume knob stopped working and it wasn lit plus sometimes when I was powering on the preamp coupe inputs on the RC1082 were lit on on the listening... -
Has anyone noticed the source bleed on the 1066? Not sure if this topic has been addressed yet.
Any Anolog input source can be heard on any other input source simply by turning the volume up reasonably high. And I'm not talking about maximum either, you will start to hear around 60 and... -
I presently have the RC1070 and like it very much. Have the chance to get the discontinued RC1090 at good price. Will I see an appreciable sonic improvement in that upgrsde? Or, would you wait for the upcoming RC1082 and would anyone know at this point if the upgrade will mean better sound? I hear... -
I had the opportunity yesterday to audition a pair of Paradigm Studio 100s with the Rotel RC1070/RB1070 preamp & power amp combination. My ears were very pleased. However, I am curious about the audible difference that the Rotel RC1082/RB1080 would make with these same speakers. Or maybe going with... -
Recently I bought a Rotel RA06 with associated equipment,
following the advice of a hifi-dealer. Found the speakers
disappointing and replaced them with the much more
expensive B&W 803D. Then added the Rotel RB1092 as an amplifier.
Now I am in doubt whether to replace...