hey guys new to the forum. I am trying to horizontally bi-amp a pair of jbl tl260 speakers. their owners manual says there able to be bi amped and even give a diagram on how it should be done, but each time i try the protection light comes on??? anyone know why??? im using an usher r1.5 pwr amp class a for the upper, rotel rb1092 class d for the lower, terminated chord cables and interconnects. the guys at the shop said it would be a great system but its been nothing but trouble. any advise would be much appreciated. :cry:
-
-
The protection light on what device? Have you removed any jumpers?
KalKal Rubinson
_______________________________
"Music in the Round"
Senior Contributing Editor, Stereophile
http://forum.stereophile.com/category/music-round
-
I have a NEW 1095 connected to the Pre-Amp outs of a Sony STR-DA333ES and when I power down the pre-amp the 1095 Front L-R and Rear L-R channel protection circuits activate. The center channel does not. I then have to cycle the power amp on-off-on to reset the protection circuits. The 1095 is conected... -
Hi All,
I'm building a new subwoofer using the SoundSplinter RL-R15 and Behringer EP2500.
There are two choices for the subwoofer 2ohm and 4ohm, but not sure which one to choose.... ...what benifit will I get using a 2ohm over the 4ohm? Becuase I would think the 2ohm would... -
Hi audio enthusiasts!
I plan to upgrade my HT-system in stereo with one of the above stated stereo power amps.
In my system I'm running 5 (soon 7) full-range speakers (german manufacturer ISOPHON) headed by the ISOPHON Europa II as fronts. Being a pretty hungry load, I'm... -
Which of these mix are best for biamping in this price category ?
One 1075 is basic. Biamping for main speakers - of course for stereo.
1. 1075 + 1075
2. 1075 + 2 x 1070
3. 1075 + 1090 (no biamping) -
Just received my 804's but have not hooked them up yet. I'm contemplating biamping them versus single wiring. Does anyone have an opinion on biamping? I've read in multiple posts that biwiring doesn't do much in terms of an audible difference but biamping can due to isolated current to the high and...
Comment