12V trigger??

[june]

hello all,

rsp-1068
rmb-1075
rcc-1055
rt-02

how do i get the 1075 to come on every time the 1068 is on?
the 1068 has 2 inputs for 12V triggers.

[Opus007]

Go to the main menu, and then to input .In input you will find 12volt trigger.You can set it to turn on the amp by selecting 12volt trigger 1 ,2 , zone 2 or all.You need to set it up for what ever source you will be using.Plug your trigger cable which is just a stereo jack into whichever output on the 1068 you you set up in the menu and the "IN" 12volt trigger input on the 1075.Turn both units on and set the 12volt trigger on the 1075 to the on positon.You are now good to go.

[hifiguymi]

First you have to connect the trigger cable from one of the trigger outputs on the preamp to the trigger in on the amp and make sure the switch on the amp is in the "on" position.

Once you've done that you have to set up each of the preamps inputs you are using. You have to assign the trigger output that you are using for each input you use. When you get into the on screen set up, you will see the trigger set up there.

Eric

[june]

Thanks Opus & HiFiGuy,

Everything is working great.