12V trigger question

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Zinje
    Junior Member
    • May 2007
    • 3
    #1

    12V trigger question

    Hi All,

    I now have the Rotel 1075 and had a question regarding the 12v trigger. When I turn on the receiver the 1075 turns on also. I hear an audible click and all the front circuit lights turn on then fade out. Same thing happens when it shuts off. Is this normal? Also... is the red led light suppose to be on all the time?

    Thanks
    Tags: None
      • Bottom
    • mjb
      Super Senior Member
      • Mar 2005
      • 1485
      #2
      Originally posted by Zinje
      When I turn on the receiver the 1075 turns on also. I hear an audible click and all the front circuit lights turn on then fade out. Same thing happens when it shuts off. Is this normal?
      Yes. The 1075 is turned on and off by a big relay, controlled by the receivers trigger output. The 1075's protection lights will briefly light during this process.

      Originally posted by Zinje
      Also... is the red led light suppose to be on all the time?
      Which red light?
      - Mike

      Main System:
      B&W 802D, HTM2D, SCMS
      Classé SSP-800, CA-2200, CA-5100
        • Bottom

        Comment

        • Zinje
          Junior Member
          • May 2007
          • 3
          #3
          The red power led light. Is it suppose to stay on? Does it change color when the trigger is activated?
            • Bottom

            Comment

            • mike c
              Senior Member
              • Dec 2005
              • 307
              #4
              i suppose you have a black rmb1075.

              yes, the red power led light will always be on. it will not change color.
                • Bottom

                Comment

                • Zinje
                  Junior Member
                  • May 2007
                  • 3
                  #5
                  Yes it is black. Thanks for your reply!

                  Man this thing sounds great. Now that I have gone separate I don't think i could ever go back.
                    • Bottom

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • whmacs
                      12v Trigger Sanity Check
                      by whmacs
                      Hi all,
                      I recently had a new home threatre installed which consists of my current Onkyo 787 receiver acting as a processor and new Rotel RMB-1075 and RB-1070 providing the amplification for a 7.1 setup (which sounds fantasic btw). The problem being that my Onkyo doesn't have a 12 volt trigger...
                      13 November 2003, 21:26 Thursday
                    • pchanj
                      Rotel RMB 1075 Protection light not working
                      by pchanj
                      Hi,
                      I was wondering whether someone has experienced anything like this. Just a few weeks ago, after watching a movie. I turned off my amplifier RMB 1075 and heard a loud pop. I cannot really tell if it came from the amp or speaker, but one thing I noticed though was that the protection light...
                      24 October 2015, 09:06 Saturday
                    • Patrick TX
                      Trigger pulled, Universal Remote?
                      by Patrick TX
                      Well, I finally did it, pulled the trigger on the 1066/1075 in Silver. My dealer should have it in a week. I'm moving to seperates, WooHoo! Here's my question. I was underwhelmed by the remote on the display unit I was looking at. It just didn't feel "right", to me. I was also playing with...
                      09 February 2003, 13:00 Sunday
                    • murali
                      RSP-1068 and RMB-1075 power on
                      by murali
                      Hello Rotel owners,
                      New to the forum. Just bought a RSP-1068 and RMB-1075 combo with great expectations for HT (driving center, surround and rear speakers). A couple of doubts, please:
                      (1) When I power on the RMB-1075, its LED on front plate is red and stays that way throughout though...
                      25 February 2006, 23:17 Saturday
                    • adrian carreon
                      12v trigger question...
                      by adrian carreon
                      Hello guys,

                      I've been searching this kind of question regarding on 12v trigger it seems that most of the topics is about RB-1080 and getting some problem like bad fuses, L&R ch not working due to resistor, caps and etc. Just wondering if there's anyone here encounter same problem...
                      01 May 2006, 18:24 Monday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"