RMB1075 replacing with RMB1077?

[style]

Hallo,

I have in my head the Rmb1077.
It has a sense to change rhe Rmb1075 with Rmb1077?
My set is Rsp1068+Rmb1075+Rb1092
speaker B&W803s mains (Rb1092), Htm7 center biampli, 703rear with Rmb1075 (750sub, pioneer507XD, denon3930,HD toshiba Ex1)

I like the sound from the 1092, more that the 1090 (is more appeals for me)
The better solutione would be a Rotel 3 channels (laws class 3200 or krell 3250)!!
Why not buy a Krell or Classè it is your thought! Siply Rotel is Rotel.

Or waiting the new Icepower rotel 1082? Or what is in the way .
Please your opinion.

Greetings from Switzerland Omar

[hifiguymi]

If you only have a 5.1 system, what about getting an RB-1091 for the center and the RB-1072 for the rear? In the US that would cost $100.00 less and you would have the same power for the center as the left and right. I know it would be two units instead of one, but it wouldn't take up any more space than the RMB-1075 you have now.

Eric

[style]

replacing Rmb1075 with ??

My livingroom is 10meter long and 5,5meter width.
The system is developed in the width, in any case the length of the room demands power.
At the moment I don’t need a 7.1 system (at today with “normal dvd” not exist a source 7.1,
and with a standard location not have sense to make a 7.1 – my personally opinion)
In future with the new system bluray/hd (DDplus, DDTrue,.) it can have a sense the 7.1...

The best solution can be a Rb1091 for links another 1091 for right.
2 x RB1092 for center and rear and I have 1 channel free for a possible 6.1
(more expensive as more expensive of the departure solution »
Another good solution 3xRb1092

My center Htm7 « support » the Rb1091 or will be better a Htm4s ?

And a standard Rmb1095 in place of the 1075?

Omar