Tweet
Looking at the RVE-1060 manual online, I'm not sure if you end up with only four video inputs if you link it to the 1098 or 1068? Is it mandatory to use Input 4 to pass through the 1098 OSD or can you just hook it up and rely only on th TFT on the 1098? Just realised I need 5 inputs (PS3, Cable, PC, DVD and VCR) to be passed...
-
-
You need to use the video-4 composite or svideo, but those video ports can be assigned to any of the inputs.
IE I have a 5 video sources, but also have the OSD output connected.
Input 1=component 1
input 2=component 2
input 3=component 3
input 4=s-video 1
input 5=s-video 2
S-video 4 port is connected for OSD, but is not one of the active video ports used in scaling. Even if you had 1 component and 4 video feeds, you're still only going to use either composite or svideo on video 4, so the opposite can be for OSD.
That said, yes you can still just use the TFT for OSD.
Kevin D. -
Thanks KevinComment
Comment