I've had the RR-969 since I purchased my 1055 almost 4 years ago. I use it for the receiver, cd player, dvd player, and TV. Recently, I lost the "down" or "back" button portion of the Channel (CH) button. Batteries are fine. I can go up through TV channels, but not down. Everything else works fine. I guess it could be worn out, but I figured the channel up button would go out just as quickly? Anyone else have this, or a similar, problem w/ the remote? Am I naive to think that the remote should last this long?
-
Christopher -
So the CH down doesn't work on every mode? Remote is covered by the warranty too, so I would just send it in with your 1055.
Kevin D. -
Yeah, it doesn't work on any setting. I thought the remote only had a 1 year warranty (I've had it for 3 years)?ChristopherComment
-
I honestly never checked if the warranty was different.. I'm sure if you ask nicely they would replace it anyway to help ease the troubles with your 1055.
Kevin D.Comment
-
Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.
1. How do I know what firmware is installed on my processor?
Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...15 April 2003, 14:08 Tuesday -
Dear All,
My beloved Rotel RSX-1055, went down yesterday I donno how, in the morning I was listening to tuner and everything was fine, and shut it off shut it off by remote, I came back from work and put it on using remote and it wouldn’t start and when I checked the system, to my surprise... -
I'm just curious if you think Rotel will warrant this.
Here's what happened. I'm watching the Pens game last night. And of course they are pulling an EPIC FAILURE. So right at the time of me thinking well, it's my mojo, I don't have the 1098 set to 52 on the volume control. It's either...Yes they should it's all their fault the Pens lost because I couldn't change the volume.25.00%3Well No, but it'd be nice if they did anyways.33.33%4Are you Retarded!?41.67%5 -
I returned home from a 3 day trip and find that my new 1055 (v 2.24) is very slow to accept IR commands. i.e., the volume will not ramp when I hold down the volume UP/DOWN button. To change Video sources I often have to press a button 4 or 5 times. Control from the front panel of the receiver is fine.... -
I have temporarily set-up my new RSX-1055 to make sure all is working correctly. It has the latest firmware.
The current set-up is 2 channel. Just the basics for right now. I went into the set-up menu and changed the front main channels to "large". I set all the rest to "none"....
Comment