Problems with 1055

[razzbo56]

For some strange reason I now have to go to input #1 on the receiver to get a picture then switch to input #5 to get sound and a picture. If I start out on input #5 I will get the audio but not a picture. This only started about a week ago. Prior to this everything was coming up on input #5.There were no wiring changes done,and this system has been in operation for approx. 3 months. What gives ??

[sirbogey]

Are you talking about the RSX1055? If so, you've been using it only for 3 months? I also own a 1055, but never came across anything like this before. Why don't you send it in to Rotel for a checkup?

[razzbo56]

Yes it is the RSX-1055. The receiver is about 2 years old. I moved and hooked it up in the new house about 3 months ago with no problems until now.

[Kevin D]

I would write down all you settings then do a factory default. Is it just the first time you turn on? IE after you get s&v on 5, can you go to input3 then back to input5 and still be good?

Kevin D.

[razzbo56]

It happens all the time,not just when I first turn it on. Yes if I go to input 3 it will still show the picture but no audio. When I go back to input 5 I have both again.

[razzbo56]

No more ideas ??

[Kevin D]

So doing a factory default didn't change anything?

Kevin D.