RDV-1080: no power - just died

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sixsevans
    Junior Member
    • Jan 2003
    • 1
    #1

    RDV-1080: no power - just died

    I just put a DVD into my Rotel RCV-1080, and it just powered off and won't turn back on.
    Has anyone else heard of this problem?
    Is there anything I can do?
    I've had it for about 3 years, if I take it back to the dealer is it reasonable to have any expectations that they can do anything?
    Tags: None
      • Bottom
    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601
      #2
      Haven't heard of that before, but I wasn't around too much when the 1080's were out. Rotel only has a 2 year warranty on their DVD players, but they can certainly check it out for you and give you a quote.

      Kevin D.
        • Bottom

        Comment

        • Cornchips
          Junior Member
          • Nov 2005
          • 24
          #3
          Power Cord -- dumb questions...

          Were you able to verify the power cord and all that...Does the standby RED LED light up at all?

          If you have a stand-by LED -- What happens after you do a soft reset (unplug for 5 mins) and reapply power?

          Just ran through the manual....that's all I got!?

          --ksr
          Don't touch that wire...
          The touching story of one man and several amplifiers.
            • Bottom

            Comment

            • Azeke
              Super Senior Member
              • Mar 2003
              • 2123
              #4
              Sixsevans,

              I haven't experienced that with my RB-1080. I concur with Cornchips, verify the power cord is full seated at both ends. I know the power cord on my 1080 has wiggled loose a couple of times. Also check for blown fuses, once power has been verified, unplug before checking.

              Peace and blessings,

              Azeke
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • RoMan
                  Rotel 1565 power cord issue
                  by RoMan
                  Quick question. What is the best way to secure the power cord in the socket of my Rotel RMB 1565 amp? Everytime I need to move my cabinet the power cord seems to lose contact with the socket and the amp shuts off. I'm finding I need to turn off the amp, and then reach in and push it in to get a good...
                  01 August 2012, 18:20 Wednesday
                • Ron Reda
                  1066 Power cord replacement
                  by Ron Reda
                  Based on some discussion in another thread, I went ahead and ordered a VH Audio Flavor 3 power cord to replace the stock cord that came with the 1066 pre/pro. However, when it arrived today, I noticed that the cord had a three-prong female receptacle with a three-prong male receptacle versus a two-prong...
                  26 August 2003, 18:43 Tuesday
                • BWLover
                  Power Cord Question
                  by BWLover
                  So I got an RLC-1040 and the power cord that came with it was maybe 2 feet :M (on a good day). So I switched it with the power cord on my RB-1080. They were both 14AWG cords but the 1080's was 6 feet (long enough for my RLC-1040). Now the 2 foot cord is to short to be used on my amp. So now the cord...
                  17 August 2009, 04:36 Monday
                • toledoguy
                  Replacement Power Cord
                  by toledoguy
                  I need to purcahse a replacement power cord for a Rotel RMB-1066 Amp. Nothing wrong with the old power cord, I purchased it from an friend and the amp works fine. I tested it with the power cord from my Rotel RB-1050 amp. Any suggestions on where to find a replacement power cord? Thanks
                  09 November 2008, 13:44 Sunday
                • JonJeffman
                  RB-1080 power cord options
                  by JonJeffman
                  Hi there,
                  So my RB-1080 got delivered this weekend, but the seller forgot to put the power cord in the box. So while I wait for him to send me the stock cord I was just wondering if I could use a power cord from my PC to run the amp? Looks like the same socket to me.

                  I'm not...
                  03 August 2009, 14:20 Monday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"