Replacement Power Cord

[toledoguy]

I need to purcahse a replacement power cord for a Rotel RMB-1066 Amp. Nothing wrong with the old power cord, I purchased it from an friend and the amp works fine. I tested it with the power cord from my Rotel RB-1050 amp. Any suggestions on where to find a replacement power cord? Thanks

[Alaric]

There are umpteen million outfits willing to provide a power cord. From M*nster to Shunyata. What price range , and what expectations do you have for the change? If you just want a way to get 110 ACV from point A to Point B , there should be a plethora of options. I would check big box stores or local audio stores.

[toledoguy]

I'm looking for a cord that is of the same quality of the Rotel Power cord that has been lost. I understand that there are quite a number of maufactuers out there. Interestingly enough, when searching a number of web sites, I have found 3 prong, grounded cords, and not the two prong cord used by the amps. I'm sure that there are those who will argue that a super expensive power cord is critical, but i'll go with the one that satisfies Rotel's requirements. It wil be plugged into a modertly priced surge protector/power conditioner.

[Alaric]

I've also noticed the majority of power cords are three prong. Have you tried a Rotel dealer? They should be able to get you one.

[Wardo]

isnt this forum owned by a cable company?

[Alaric]

CAT Cables is on hiatus , although it might not hurt to ask Lex if he has any left.

[Kevin D]

The three prong cords will work fine with any Rotel piece. The third ground wire will do nothing.

Kevin D.

[toledoguy]

Will the three prong cords fit? The back of the Rotel amp I mean?

[DrJRapp]

Will the three prong cords fit? The back of the Rotel amp I mean?

Yes... it is a standard connector

[Alaric]

Will the three prong cords fit? The back of the Rotel amp I mean?

That is the issue I've had while cable shopping for my CD player. The connection on the back of the player is two prong , and the recess is a specific shape. Having a hard time finding an upgrade that fits. :scratchhead: My amp has a hard-wired power cord , and I'm sort of on the fence with that procedure. I need to be pretty certain that the benefit will be noticeable to start that project.

[toledoguy]

I'm not getting a power cord just to "upgrade", I assume the Rotel power cord works just fine. The court that came with the RMB-1066 was lost. The person I purchased it from had not used it in a little while and replaced the cord. So I'm not looking for an upgrade just a replacement.

[htsteve]

I'm not getting a power cord just to "upgrade", I assume the Rotel power cord works just fine. The court that came with the RMB-1066 was lost. The person I purchased it from had not used it in a little while and replaced the cord. So I'm not looking for an upgrade just a replacement.

You're probably looking for something like these:

http://catalog.belkin.com/IWCatProductPage.process?Product_Id=16242

http://www.parts-express.com/pe/pshowdetl.cfm?&DID=7&Partnumber=110-100&ctab=1#Tabs

Or go to a computer store (like Microcenter) and find the powercord with the biggest guage on it.


Hope this helps.

[wettou]

Here is an other option:

http://www.middleatlantic.com/power/iec.htm

NEW Signal-SafeTM IEC Power Cords

Signal-SafeTM IEC Power Cords replace the standard power cords provided with electronic components, and are available in multiple sizes, with standard or low profile, 90° angled plugs.

• Save space at the back of the rack
• Constructed of 14 gauge wire or 18 gauge wire (cable/satellite cords)
• Provides a cleaner, more organized installation
• Eliminates slack and loops caused by long power cords
• Signal-SafeTM design incorporates twisted wires to minimize disruptive AC magnetic fields
• Multiple length cords available to meet the needs of each situation
• Also available for user specifically with most satellite and cable boxes
• UL listed in the US and Canada

[toledoguy]

Just in case anyone is interested, in my search for a replacement power cord I called my local Rotel dealer. Nice guy, he didn't have the part in stock, and actually recommended a part he might not carry. The point being, he was rather insistent that a high quality IEC power cord, better than even the one that comes with the Rotel Amps would be of benefit. His theory is that in a high current amp, like the Rotel Amps electricty is everything, thus, a cord that helps get the electricty with as little resistance as possible to the amp from the wall is of value. So now of I go to find something I like.