RSP 1098 "Contour"

[rockbobmel]

Anybody know what freq. the contour controls are set at? Also what Qwidth?

Can there be a software mod to change the functions of these controls?

Thanks, Bob

[Kevin D]

No idea on the frequencies or Q, but don't expect an option to change it. The replacement for the 1098 will probably have some form of EQ though.

Kevin D.

[mikefish]

Bob
According to the manual the adjustment is +-6dB @ 50Hz for the LF & 15KHz for the HF.

Mike

[rockbobmel]

Bob
According to the manual the adjustment is +-6dB @ 50Hz for the LF & 15KHz for the HF.

Mike

I looked and looked. I could not find the freqs.

[mikefish]

Bob
Not sure if we have the same manual then. I actually checked the downloaded one I have from the Rotel website. It is on page 39 of 40 under the specifiactions (audio) section.

Mike

[mikefish]

I just checked the user manual on the US site (I normally visit the global site) and it seems to be the same.

Mike

[rockbobmel]

Bob
Not sure if we have the same manual then. I actually checked the downloaded one I have from the Rotel website. It is on page 39 of 40 under the specifiactions (audio) section.

Mike

Thanks. Mike, I did not think to look there. I found it.