has any one figured out a way to boost out put power of their xm units. it seems like my 1070 and 1080 have to work way to much to amp the signal. thanks 8)
-
Last edited by AMPER; 17 December 2005, 19:07 Saturday. -
Most have a 'line-out' setting in the setup menu, I'm assuming you've moved that to the highest setting?
Kevin D. -
yes.Comment
-
I know one of the benifits of the Polk piece is a hotter output, seems most of the car models are a little low. A simple line level amp should help you out like this one:
Even mentions use for XM.
Kevin D.Comment
-
cool, but looks like this model is more for car applications(12VDC). but is a starting point. thanksComment
-
12vdc is 12vdc. Get a 12v DC power supply from Radio Shack and wire it up. I highly doubt you will find anything that cheap for home use (and if you do it will be the same thing with the same power supply, but a nice plug to plug it in).
Kevin D.Comment
-
cool, thanksComment
-
Polk XM Tuner Output
I've played with the Polk XM Tuner signal settings -- no audible difference.
Back when I used the original Delphi SkyFi (and home cradle) you could hear a difference. The quality, however, was bad at all levels.
--ksrDon't touch that wire...
The touching story of one man and several amplifiers.Comment
-
cornchips I'm not sure if I understand ?
:huh:Comment
-
Hello. I just got my RSP-1098. Firmware is version 3.1 (I guess the 2 week wait was worth it... seems as if I ended up with the most recent version). I just got my Classe CAM-200 for the center channel yesterday.
Setup:
Left, Center, Right - CAM-200
Rear - RB-1080
... -
Hi, I am setting up a 2ch configuration. Right now I have b&w 805s, RB1080, and will be getting the RDC1072 and REL sub very soon. So my question is:
What preamp should I get? It seems that people think the RC-1070 is OK and the RC-1090 was better but it has been discontinued.... -
Hello -
I am a newbie to the audiophile and wonder if someone could field a couple of questions...
1. Where should set the cross-over frequencies for my front speakers (B&W DM603 S3) and subwoofer (ASW600)? Also, for the subwoofer, there is a setting on both the... -
Hi everyone. Here’s the write up on my new RB-1070 amp.
I was and still am using a Rotel RMB-985mkII as my other amp. Both amps are matched with Rotel 1055 receiver. Speakers used are Klipsch KG series speakers, except the center backs, which are KSB series.
Equipment...29 December 2002, 13:12 Sunday -
Andrew Pratt kindly recommended I come here since this is where the experts are at.Here are my numbers:
Freq Raw Comp
16 75 86.5
18 72 80.0
20 75 82.5
22 84 90.5
25 84 89.0
28 78.5 82.5
31.5 80.5 83.5
36 91.5 94.0
40 97 99.5
...
Comment