1098-2CH DSP Music Modes 1-4 from RC

[Britchie]

Does anyone know how to change between the four msuic modes Music 1, Music 2, Music 3 Music 4 which are available for 2ch playback? I can't switch these from the remote control? No problem switching this from the unit.

Thanks.

Brad

[mazuly]

Hi

This is not as strait forward from the remote since you can not jump strait to music 1 from the remote. What you can do is to do the following:

1) Open the lid that covers the buttons on the bottom of the remote
2) Press the 5CH button
3) Before the 5CH is erased from the TFT display, press the left arrow button and that will take you to music 5
3) Now the left and right button on the remote can change the setting to music 3 back to 4 down to 2 …..etc

Remember one thing though, if the setting is erased from the TFT screen, the left and right button will not change the setting anymore so you have to start all over by pressing the 5CH button and use the left arrow button again. Well it is a drag but what can you do

If anybody else has a better way of doing it, I am all ears

Good luck,
Maziar

[MICHAEL STRO]

when you select the 2 ch button or any of the other soundfield buttons plc plm etc... while the selection is on screen push the + button next to the the ENT button. every time you push the + it will go to the next mode.