RSX-1055 and sub ??

[Tha Freak]

I have a RSX-1055 as my HT receiver :T

I just bought a Reel Acoustics RSW-1215 sub...

I'm just asking myself if I have plugged it allright...

On the RSX-1055:

- I connected the sub cable in the "SUB1" output

- I set my speakers to "SMALL" and sub to "YES" (not MAX)

- I set the 1055's crossover point to 80hz

On the sub:

- I connected the sub cable in the input

- I set the crossover point to 150hz (since nothing more than 80hz is sent by the 1055?)...

- didn't touch the phase knob

- adjusted the volume to match the output volume of the speakers (around noon)

from there, am I all right?

Now for the questions:

- the .1 track in the 5.1 mixes (DD or DTS) is completeley independent, meaning it has it's own information?

- the 80hz crossover point on the 1055 is only to re-sent to the sub the frequencies from the main, centre and surrounds speakers? the .1 info is it's own?

- with the sub wire, there was a "Y" interconnect included, should I connect it into the "SUB1" and "SUB2" from the 1055? or just connect the single end in "SUB1" ?

Will probably have more comming!!

thanks!!

[aud19]

Just use the one output Otherwise looks like you've got everything figured out

[Tha Freak]

every statement is well understood?...

I was not aware that I understood that well!! :T

thanks!