I have a Panasonic TH32PWD5 Plasma display, which I understand emits substantial IR radiation which on occasion crosses with the IR frequency used to adjust the RSP's volume!! So on a few occasions I have noted the RSP's volume changing "on its own" to max on one occasion and to zero on two occasions. Also with the Xantech setup I was unable to adjust the voume on the RSP with the remote, but with screen off - no problem. Now have fitted Xantech 490-90 to try and oversome this and so far so good - but dread the day when I am not immediately around and volume hits max - "on its own"!!! Anyone else have similar problem , any clever other work around ?
-
hi all, I have some questions regarding xantech that I am hoping someone can help with
1. can I plug a xantech ir receiver directly into the main ir input on my c2?
2. can I plug a 3.5mm jack (mono?) between the zone 2 ir input on my c2 and a xantech CB20. I want to... -
I'm not having any luck getting my Xantech IR repeaters and emitters to work with my RSP1066. I currently have an entire Xantech distribution system and everything works fine. When plugged into the 1066, the receiver doesn't even flash to indicate a signal is being received. The Rotel manual names Xantech... -
I've had my 1068 for a few months now and all of a sudden my volume is going crazy. It keeps jumping up really high even after I take my finger off the volume button and the same going down. I know the update made the volume go a lot faster, and I am used to that change.... that's not whats happening.... -
I am driving two B&W 685s (no subwoofer) with a 6 ohm rated Pioneer-Vsx-519V-K receiver and source is a desktop Pc with onboard Realtek High Definition Audio sound chip.
Pioneer Vsx-519V-K's max volume level is "80" and source Pc's volume level is at highest.When I turn... -
Hello. I just got my RSP-1098. Firmware is version 3.1 (I guess the 2 week wait was worth it... seems as if I ended up with the most recent version). I just got my Classe CAM-200 for the center channel yesterday.
Setup:
Left, Center, Right - CAM-200
Rear - RB-1080
...
Comment